User manual SAMSUNG CZ-21A113N5

[. . . ] S56A_UI_ENG_EU 8/30/03 10:47 AM Page 1 COLOUR TELEVISION Owner's Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. REMOTE CONTROL ON-SCREEN MENUS TELETEXT FUNCTION (depending on the model) ENG S56A_UI_ENG_EU 8/30/03 10:47 AM Page 2 Safety Instructions ENG The following illustrations represent the precautions to be taken when using and moving your television. 10% H 5¡ 35¡ H 75% Do NOT expose the television to extreme temperature conditions or to extreme humidity conditions. Do NOT expose the television to direct sunlight. Do NOT expose the television to any liquids. If the television is broken, do not try to repair it yourself. Contact qualified service personnel. During a storm conditions (especially when there is lightning) unplug the television from the mains socket and aerial. If the remote control is not used for a long period of time, remove the batteries and store it in a cool, dry place. THIS DEVICE IS NOT FOR USE IN INDUSTRIAL ENVIRONMENTS Displaying any stationary images that exceed the long time, it can cause uneven aging of picture tubes (CRTs) that leave subtle, but permanent burned-in ghost images in the television picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. Caution CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash and arrow head within the triangle is a warning sign alerting you of "dangerous voltage" inside the product. The exclamation point within the triangle is a warning sign alerting you of important instructions accompanying the product. CAUTION: TO PREVENT ELECTRICAL SHOCK, DO NOT REMOVE REAR COVER, NO USER SERVICEABLE PARTS INSIDE. [. . . ] When you scan through the stored channels, those you have chosen to skip are not displayed. All channels that you do not specifically choose to skip are displayed during scanning. Select Enter Exit 1 2 Press the MENU ( ) button. Press the L or M button to select the Channel and press the oe or button. Press the L or M button to select the Add/Erase and press the oe or button. Result: The Add/Erase menu is displayed. Channel Add/Erase P0 P1 P2 P3 : Added : Added : Added : Added 3 4 Select Adjust Exit Press the L or M button to select the required channel. To add or erase the desired channel by pressing the oe or button. When you have finished adding and erasing channels, press the EXIT ( ) button or, press the MENU ( ) button repeatedly to return to normal viewing 5 6 Channel Add/Erase P0 P1 P2 P3 : Erased : Added : Added : Added Select Adjust Exit 18 S56A_UI_ENG_EU 8/30/03 10:47 AM Page 19 Fine tuning Channel Reception ENG If the reception is clear, you do not have to fine-tune the channel, as this is done automatically during the search and store operation. If however the signal is weak or distorted, you may have to finetune the channel manually. Channel Auto Store Manual Store Name Add/Erase Fine Tune Sort 1 2 3 Press the MENU ( ) button. Press the L or M button to select the Channel and press the oe or button. Press the L or M button to select the Fine Tune and press the oe or button. Result: The Fine Tune menu is displayed with the Tune selected. Result: The horizontal bar's cursor moves to the left or right. Result: OK is displayed. Select Enter Exit Channel Fine Tune Tune Store Erase : -/+ :?obtain a sharp and clear picture and good sound quality Select Adjust Exit memorise adjusted picture or sound Fine Tune erase adjusted picture or sound Channel Fine Tune 5 When you have finished, press the EXIT ( ) button or, press the MENU ( ) button repeatedly to return to normal viewing. Tune Store Erase : -/+ : OK :? Select Adjust Exit Channel Fine Tune Tune Store Erase : -/+ :?: OK Select Adjust Exit 19 S56A_UI_ENG_EU 8/30/03 10:47 AM Page 20 Sorting the Stored Channels ENG You can exchange the numbers of two channels, in order to: Channel Auto Store Manual Store Name Add/Erase Fine Tune Sort N Modify the numeric order in which the channels have been automatically stored. N Give easily remembered numbers to the channels that you watch most often. Select Enter Exit 1 2 Press the MENU ( ) button. Channel Sort From To Store : P 1 ----: P-- - - - - :? Press the L or M button to select the Channel and press the oe or button. Press the L or M button to select the Sort and press the oe or button. Result: The Sort menu is displayed with the From selected. 3 4 Select Adjust Exit Press the oe or button until the channel number that you wish to change is displayed. Result: The selected channel's picture is displayed. Channel Sort From To Store : P 1 ----: P 3 ----:? 5 6 Press the L or M button to select the To. Press the oe or button until the new number by which you wish to identify the channel is displayed. Result: The selected channel is exchanged with the one previously stored to the chosen number. Select Adjust Exit Channel Sort From To Store : P 3 ----: P 1 ----: OK Example: If you select P 1 for the From and P 3 for the To: N Channel 1 becomes channel 3. N Channel 3 becomes channel 1. 7 To. . . Confirm the exchange of channel numbers Press the. . . Result: OK is displayed. Select Adjust Exit You can exchange other channel numbers by selecting From and returning to step 4. 8 When you have finished sorting channels, press the EXIT ( ) button or, press the MENU ( ) button repeatedly to return to normal viewing 20 S56A_UI_ENG_EU 8/30/03 10:47 AM Page 21 Selecting a Channel Numbered Ten or Over ENG When using the numeric buttons to select a channel stored at programme position ten or higher, follow the instructions below. 1 Press the -/-- button. [. . . ] " (ON/OFF) button to turn your " (ON/OFF) button on the front panel Troubleshooting: Before Contacting Service Personnel Before contacting Samsung after-sales service, perform the following simple checks. If you cannot solve the problem using the instructions below, note the model and serial number of the television and contact your local dealer. No sound or picture N N N N Check that the mains lead has been connected to a wall socket. Check that you have pressed the " " (ON/OFF) button. Check the picture contrast and brightness settings. [. . . ]