User manual SAMSUNG D1070

[. . . ] Instructions Use this camera in the following order. Setting up the application software To use this camera with a PC, install the application software first. After this has been done, the stored images in the camera can be moved to the PC and can be edited by an image editing program. (p. 17) Getting to Know your camera Thank you for buying a Samsung Digital Camera. [. . . ] [Date&Time] : The DATE & TIME will be imprinted on the image file. Auto power off This function switches the camera off after a set amount of time in order to prevent unnecessary battery drainage. - Sub menus [Off] Off Date Date&Time OK Set SETTINGS Format Reset File Imprint Power Off Video Out Back The Date & Time are imprinted at the bottom right side of the still image. The imprint function is applied only to still images. Depending on the manufacturer and print mode, the date printed on an image may not be printed correctly. : The power off function SETTINGS Format will not operate. Reset Off [1, 3, 5, 10 min] : The power will turn File 1 min 3 min off automatically if not ImprintOff Power 5 min 10 min used for the period of Video Out OK Set Back time specified. - After replacing the battery, the power off setting will be preserved. - Note that the automatic power off function will not operate if the camera is in the PC / Printer mode, slide show, playing back a voice recording and playing back a movie clip. 50 Settings ( " ) Selecting Video out type The Movie output signal from the camera can be NTSC or PAL. Your choice of output will be governed by the type of device (monitor or TV, etc. ) to which the camera is connected. Connecting to an external monitor When the camera is connected to an external monitor, the image and menus on the LCD monitor will be visible on the external monitor and the LCD monitor of the camera. - NTSC : U. S. A, Canada, Japan, South Korea, Taiwan, Mexico. - PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany, U. K. , Holland, Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden, Switzerland, Thailand, Norway. - When using a TV as an external monitor, you will need to select the external or AV channel of the TV. - There will be a digital noise on the external monitor, but it is not a malfunction. - If the image is not in the centre of the screen, use the TV controls to centre it. - When the camera is connected to an external monitor, some parts of the image may not be displayed. - When the camera is connected to an external monitor, the menu will be visible on the external monitor and the menu functions are the same as those indicated on the LCD monitor. SETTINGS Format Reset File Imprint Power Off Video Out Back NTSC PAL OK Set Yellow - Video White - sound 51 Settings ( " ) Auto Focus lamp You can turn on and off the Auto Focus lamp. - Sub menus [Off] : The AF lamp will not light up in low light conditions. [On] : The AF lamp will light up in low light conditions. Selecting a battery type If a battery type is selected, the camera will be optimized according to the selected battery type. SETTINGS Reset File Imprint Power Off Video Out AF Lamp Back Off On OK Set [Battery Type] sub Menu : Alkaline / Ni-MH SETTINGS File Imprint Power Off Video Out AF Lamp Battery Type Back Alkaline Ni-MH OK Set 52 Starting play mode Turn the camera on and select Play mode by pressing the play mode button ( ). The camera can now play back the images stored in the memory. If the memory card is inserted in the camera, all the camera functions apply only to the memory card. If the memory card is not inserted in the camera, all the camera functions apply only to the internal memory. Playing back a movie clip 1. Select the recorded movie clip that you want to play back by using the Left/Right button. [. . . ] In some security programs (Norton Anti Virus, V3, etc. ), the computer may not recognise the camera as a removable disk. Stop the security programs and connect the camera to the computer. Refer to the security program instructions about how to temporarily disable the program. The camera is connected to the USB port located on the front of the computer. [. . . ]