User manual SAMSUNG DCB-B260

[. . . ] 4 Insert the two batteries supplied in your remote control. Batteries are removable from the remote using common household tools (like a screwdriver. . . ) The batteries supplied do not contain hazardous substances such as Mercury, Cadmium, or Lead. However, they must not be disposed of with your household waste but to a local separate collection system. 5 Reconnect your TV set and recorder to the mains. [. . . ] - Move to the programme for which you want more detailed information using the arrow keys and the colour keys as indicated at the bottom of the screen. · Press the yellow colour key once to get extended information (programme summary), and once again to close it. · Press the blue colour key to set a timer on the selected programme. - Press OK to exit and view the selected programme. A No information yet message is displayed if the selected channel does not provide EPG data. It may take a few seconds before data can be displayed. Recording timers Recording timers are used for VCR or DVD recordings. Setting a timer from the EPG - Press EPG when watching a channel. 18 - Move to the desired programme using the arrow keys and the colour keys. - Press the blue colour key to set a recording timer on the selected programme. - Enter your PIN code if necessary, and then set the recording settings using the arrow or number keys as appropriate. By default, the settings correspond to the selected programme. For more information, refer to paragraph Timers Manager. - Press EXIT to save and exit. EN Setting a timer while watching digital TV or listening to digital radio - Press TIMER. · Repetition: set Once for a single timer, Daily to set a timer once every day, or Weekly to set a timer once a week on a particular day · Action: action performed at timer start (and end): Power OFF, Power ON, Power ON/OFF, Recorder ON/OFF (Easy Record), Zap To Channel · Day of week: from Monday to Sunday, in case of a Weekly recording only · Date: press OK to display the calendar. Select the month using y or t, and then select the day using u or i. Press OK to confirm and return to the previous screen. Press EXIT to cancel your selection and return to the previous screen. · Start time, and end time: set the timer start and end time using number keys · Channel: current channel. Alternatively, press the green colour key to display the list of available channels. Then scroll to the channel on which you want the receiver to tune at timer start using the t or y key, and press OK to select it. If you modify the timer's Number, you select another timer. When exiting the screen, you will save all the timers you modified. When a recording timer is active, you should not change digital channels or you will record the channel you tune to. However you can switch to analogue TV using the TV/STB key and zap through analogue channels. EN 21 EN Channels Manager Channels Organization - Use the green colour key to skip or unskip individual channels. Channels marked as skipped will be skipped only when using the P+ or P- key. - Use the yellow colour key to enable sorting options, then proceed as follows: · Press the red colour key to sort channels alphabetically · Press the green colour key to sort channels according to their type: free-to-air or scrambled · Press the yellow colour key to sort channels according to broadcast frequency · Press the blue colour key to sort channels according to channels numbers. [. . . ] Check that the power is available at the wall socket. No sound or picture but the front panel LED is lit in red. Receiver in standby Press P+, P-, or any number key of the remote control. If the receiver does not wake up, press on the front panel. Check the connections at the wall socket and receiver. Press TV/STB on the remote control once or twice. [. . . ]