User manual SAMSUNG DIGIMAX202

[. . . ] ENGLISH Thank you for buying a Samsung Camera. This manual will guide you through using the Digimax 202, including capturing images, downloading images and using the MGI PhotoSuite III SE software. Please read this manual carefully before using your new camera. Instructions Use this camera in the following order Before connecting the camera to a PC, via the USB cable, you will need to set up the camera driver. Install the camera driver that is contained in the Application S/W CD-ROM. (p. 73) Set up the camera driver Take a picture (p. 21) Take a picture Insert the USB cable Insert the supplied USB cable into the PC's USB port and the camera's USB connection terminal. (p. 80) Check the camera's power Check the camera's power If the power is turned off, press the camera button to power it on. (p. 25) Check [Removable Disk] Open Window s EXPLORER and search for [Removable Disk]. (p. 81) If you use a card reader to copy the images on the memory card to your PC, the images could be damaged. [. . . ] ON If [OFF] is selected : Press the OK button to cancel the image rotation. If [ON] is selected : Press the OK button to rotate the image 90 degrees clockwise. A menu where you can check the ROTATE execution of the rotation of the SET image will appear. Use the UP and DOWN buttons to select [ROTATE], and then press the OK EXIT:SHUTTER SET:OK button. The image will continue to rotate 90 degrees. When the image is in the desired orientation, use the UP and DOWN buttons to select [SET], and then press the OK button. [Rotated 90 degrees] [Rotated 180 degrees] [Rotated 270 degrees] 4. The rotated image will be saved with a new file name and the menu screen will disappear. - If you display the rotated image on the LCD monitor, empty spaces may appear to the left and right of the image. - If memory space is insufficient, the [CARD FULL!] message will be displayed and you will not be able to rotate the image. 52 Resize A stored image size can be changed and used as a logo image. The resized image will have a new file name. Press the play mode button and press the menu button. Press the LEFT/ RIGHT button and select the [RESIZE] menu tab. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button. RESIZE 1024X768 640X480 S. IMAGE Image Resize Types Sub menu Application 1024X768 For wallpaper 640X480 For simple storage S. IMAGE For the startup image RESIZE table Size 1600 1024 640 1024X768 O X X 640X480 O O X S. IMAGE O O O INFORMATION A large sized image can be resized to a smaller sized image, but not vice versa. You cannot resize a JPEG image, even if the image has a 4:3 frame aspect ratio (1600x1200, 1024x768, or 640x480), unless the image is compressed in JPEG 4:2:2 format. If the memory capacity is insufficient to store the resized image, a [CARD FULL!] message will display on the LCD monitor and the resized image will not be stored. 53 Setup menu In this mode, you can set up basic settings. You can use the setup menu in all camera modes. The items indicated by are default settings. Menu tab Main menu FILE SERIES PWR OFF Sub menu RESET Secondary menu p. 55~56 Page CANCEL, 1 ~ 10MIN ENGLISH KOREAN FRENCH GERMAN - p. 56 LANGUAGE SPANISH ITALIAN S. CHINESE T. CHINESE NO FORMAT YES YY/MM/DD D. TYPE MM/DD/YY DD/MM/YY DATE TIME - p. 57 p. 57~58 p. 58 2004/01/01 16:43 OFF - p. 59 p. 59 p. 60 IMPRINT DATE DATE&TIME 54 Setup menu Menu tab Main menu BEEP OFF 50Hz FREQUENCY 60Hz OFF Q. VIEW 1 ~ 3 SEC NO RESET YES NO LATEST YES Menus are subject to change without prior notice. p. 63 p. 62 p. 62 p. 61 Sub menu ON p. 60 Secondary menu Page File name This function allows the user to select the file naming format. Press the LEFT/ RIGHT button and select the [SETUP] menu tab. Select the [FILE] menu by pressing the UP/ DOWN FILE RESET button and press the RIGHT button. Select a desired sub menu by pressing the UP/ DOWN BACK: SET:OK button and press the OK button. [. . . ] Do the following to check [Universal serial bus controller]. Win 98/ME : Trace [Start Setting Controller System Device Manager Universal serial bus controller] Win 2K : Trace [Start Setting Controller System Hardware Device Manager Universal serial bus controller]. 98 FAQ : Trace [Start Control Panel Performance and Maintenance System Hardware Device Manager Universal Serial Bus controller]. There must be USB Host Controller and USB root hub under [Universal serial bus controller]. In addition, double-click on the USB Universal Host Controller and the USB Root Hub to check if the Device Status states "This device is working properly". [. . . ]