User manual SAMSUNG DIGIMAX230

[. . . ] This manual will guide you through using the Digimax 230, including taking images, downloading images and using MGI PhotoSuite III SE software. Please read this manual before using your new camera. ENGLISH SPECIAL FEATURES Thank you for buying a Samsung Digital Camera. This digital camera has the following features. A high resolution of 2. 0 mega pixels A 3 X optical and 2 X digital zoom lens Movie clip recording function Voice Recording & Playback for still image An easy and fast PC interface with USB Storage Driver & Digimax viewer An FCC warning This device has been tested in accordance with the limits of a class B digital device under item 15 of the FCC rules. [. . . ] Recording can be stopped by pressing the MIC ( ) button again. The sound will record for 10 seconds. 10SEC REC 2002/ 1/ 1/ 00 : 00 ADVANCED [ Being recorded ] PLAY & PAUSE / DOWN button When the LCD monitor is turned on, pressing the DOWN ( ) button will move the cursor down or change the sub menu. When the LCD monitor is not turned on, the DOWN ( ) button is used as the PLAY & PAUSE ( ) button. The PLAY & PAUSE ( ) button is used for playing and pausing a sound recorded still image, movie clip or slide show. Press the LEFT ( ) / RIGHT ( ) buttons to select a sound recorded still image or a movie clip. Press PLAY & PAUSE ( ) button. SETTING UP PLAY BACK FUNCTIONS PLAY & PAUSE explained If an image is showing, but there is no sound (or movement) : Press the PLAY& PAUSE ( ) button to play the sound clip or to start the movie clip. 12/ 13 13/ 13 2002/ 1/ 1/ 00 : 00 2002/ 1/ 1/ 00 : 00 [ A sound recorded still image ] [ A movie clip ] If the image is playing : The progress is paused. 9SEC 9SEC 2/ 13 PAUSE 2002/ 1/ 1/ 00 : 00 2002/ PAUSE 1/ 1/ 00 : 00 2002/ PAUSE 1/ 1/ 00 : 00 [ A sound recorded still image ] [ A movie clip ] [ Slide show ] If the PLAY & PAUSE ( or movement will resume. ) button is pressed when the image is paused, the sound Reference When an image is being played back, press the MENU button to cancel the progress. SETTING UP PLAY BACK FUNCTIONS Setting up play back function using the LCD monitor DELETE ALL This enables you to clear all images from the CF CARD. Remember that this will permanently delete images. Important shots should be stored on a computer before deletion takes place. Press the MENU button to display the menu on the LCD monitor. Press the UP ( ) / DOWN ( ) button and select [DELETE DELETE ALL NO YES ADVANCED ALL]. Shift the cursor to the [DELETE ALL] sub menu by pressing the SELECT OK SET RIGHT ( ) button. Select the desired sub menu by pressing the UP ( ) / DOWN ( ) button and then press the OK button. - Selecting NO : The display is returned to the initial menu, and [DELETE ALL] menu is highlighted. Press the MENU button, and the menu display will no longer show. - Selecting YES : [ARE YOU SURE?] message will display. Selecting [NO] makes the menu display return to the initial display. If you select [YES], [WAITING. . ] message will display and all the images are deleted. The menu display will return to the initial display. [NO IMAGES] message will be shown by pressing the MENU button. SETTING UP PLAY BACK FUNCTIONS SLIDE SHOW Images can be displayed continuously at pre-set intervals. Press the MENU button to display the menu on the LCD monitor. Press the UP ( ) / DOWN ( ) button and select [SLIDE SHOW]. Shift the cursor to the [SLIDE SHOW] sub menu by pressing RIGHT ( ) button. [. . . ] Connect the USB cable again and turn the camera power on. Then the computer should now recognize the camera. SOFTWARE FAQ About USB [Case 7] There is an unexpected error during file transfer. [Case 8] How do I know my computer supports a USB Interface?Check the USB port in your computer or keyboard. [. . . ]