User manual SAMSUNG DIGIMAX240

[. . . ] This manual will guide you through using the Digimax 240, including taking images, downloading images and using the MGI PhotoSuite III SE software. Please read this manual before using your new camera. ENGLISH Instructions Use this camera in the following order Set up the camera driver Before connecting the USB cable to the PC and this camera, you have to set up the camera driver. Install the camera driver that is contained in the Application S/W CD-ROM. (p. 99) Take a picture Take a picture (p. 35~57) Insert the USB cable Insert the supplied USB cable into the PC USB port and the camera USB connection terminal. [. . . ] To pause or restart the slide show, press the PLAY/ STOP/DOWN( ) button. To stop the slide show, press LEFT( )/RIGHT( ) button or the MENU button. Press the MENU button and the initial menu will be displayed. Press the MENU button again and the menu will be cancelled. PLAY SLIDE SHOW PROTECT DELETE ALL LCD BRIGHTNESS EXIT:MENU CHANGE: 0 1/2 3 SEC PLAY SLIDE SHOW 3 SEC 1/2 BACK: SET:OK 69 Play mode PROTECT This is used to protect specific shots from being accidentally erased (LOCK). It also releases images that have been previously protected (UNLOCK). Protecting images 1. Press the MODE button to select the PLAY mode( ). Select an image that you want to protect by pressing the LEFT( )/ RIGHT( ) button. Press the MENU button to display the PLAY mode menu on the LCD monitor. Press the UP( )/ DOWN( ) button and select [PROTECT]. Press the RIGHT( ) button and the sub menu will display. Select [ONE IMAGE] or [ALL IMAGES] by pressing the UP( )/ DOWN( ) button and press the RIGHT( ) button. - ONE IMAGE : This protects a single image. - ALL IMAGES : This protects all the images in the memory. Select [LOCK] or [UNLOCK] by pressing the UP( )/ DOWN( ) button and press the OK button. - UNLOCK : Discards the PROTECT function. If you protect an image, the protect icon( ) will be displayed on the LCD monitor. PLAY SLIDE SHOW PROTECT DELETE ALL LCD BRIGHTNESS EXIT:MENU CHANGE: 0 1/2 3 SEC PLAY PROTECT ONE IMAGE ALL IMAGES 1/2 BACK CHANGE: Protect indicator Unprotected image do not have an indicator. 70 Play mode NOTICE An image in LOCK mode will be protected from [DELETE] or [DELETE ALL] functions, but will NOT be protected from the [FORMAT] function. DELETE ALL Deleting all images This enables you to clear all unprotected images from the memory. To delete the images or movie clips stored in the internal memory, remember not to insert the memory card in the camera. Otherwise, you will delete the images or movie clips stored in the memory card. ADVANCED Deleting all images 1. Select the PLAY mode( ) by rotating the mode dial. Press the MENU button to display the PLAY mode menu on the LCD monitor. Press UP( ) /DOWN( ) button and select [DELETE ALL]. Press the RIGHT( ) button and the sub menu will display. [. . . ] Transfer the file again. [Case 2] [Case 3] [Case 4] [Case 5] SOFTWARE 129 FAQ About USB [Case 6] How do I know my computer supports a USB Interface?Check the USB port in your computer or keyboard. USB Interface is available in Windows 98, 98SE, 2000, ME . XP. Check [Universal serial bus controller] in Device Manager. [. . . ]