User manual SAMSUNG DIGIMAX250

[. . . ] ENGLISH Thank you for buying a Samsung Camera. This manual will guide you through using the camera, including capturing images, downloading images and using the application software. Please read this manual carefully before using your new camera. Instructions Use this camera in the following order Before connecting the camera to a PC, via the USB cable, you will need to set up the camera driver. Install the camera driver that is contained in the Application S/W CD-ROM. (p. 79) Set up the camera driver Take a picture (p. 21) Take a picture Insert the USB cable Insert the supplied USB cable into the PC's USB port and the camera's USB connection terminal. (p. 87) Check the camera's power Check the camera's power If the power is turned off, press the camera button to power it on. (p. 25) Check [Removable Disk] Open Window s EXPLORER and search for [Removable Disk]. (p. 88) To play back a video shot with this camera, be sure to use the QuickTime player supplied on the software CD-ROM. [. . . ] Press the LEFT/ RIGHT button and select the [SLIDE] menu tab. Use the UP and DOWN buttons to select the desired submenu value, and then press the RIGHT button. EXIT:MENU - Slide Show Display Interval : OFF, 1~10SEC 5. Use the UP and DOWN buttons to select the Repeat Slide Show menu. - [ON] : Even once a cycle(from the first image to the last image) is completed, the slide show will 2SEC continue to repeat itself. - [OFF]: If a cycle is completed, the slide show will stop BACK: automatically. Press the OK button and the slide show will start. - To pause the slide show, press the play & pause button. - To start the slide show again, press the play & pause button again. - Press the menu button again and the slide show will stop. SLIDE MOVE: SLIDE REPEAT ON OFF SET:OK INFORMATION The loading time depends on the image size and quality. The slide show will start from an image that was displayed on the LCD monitor. The auto power off function can't be activated. While the slide show is playing, only the first frame of an mov file is displayed. 55 Resizing A stored image size can be changed and used as a logo image. The resized image will have a new file name. Press the play mode button and press the menu button. Press the LEFT/ RIGHT button and select the [RESIZE] menu tab. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button. RESIZE 1024X768 800X600 640X480 EXIT:MENU MOVE: RESIZE table Size 1600 1024 800 640 1024x768 O X X X 800x600 O O X X 640x480 O O O X LOGO O O O O INFORMATION A large sized image can be resized to a smaller sized image, but not vice versa. If the memory capacity is insufficient to store the resized image, a [CARD FULL!] message will display on the LCD monitor and the resized image will not be stored. 56 Rotating an image You can rotate the stored images by 90, 180, or 270 degrees. Press the play mode button and press the menu button. Press the LEFT/ RIGHT button and select the [ROTATE] menu tab. Select a desired sub menu by pressing the UP/ DOWN button. If [OFF] is selected: Press the OK button to cancel the image rotation. [. . . ] Do the following to check [Universal serial bus controller]. Win 98/ME : Trace [Start Setting Controller System Device Manager Universal serial bus controller] Win 2000 : Trace [Start Setting Controller System Hardware Device Manager Universal serial bus controller]. 97 FAQ : Trace [Start Control Panel Performance and Maintenance System Hardware Device Manager Universal Serial Bus controller]. There must be USB Host Controller and USB root hub under [Universal serial bus controller]. In addition, double-click on the USB Universal Host Controller and the USB Root Hub to check if the Device Status states "This device is working properly". [. . . ]