User manual SAMSUNG DIGIMAXS700

[. . . ] Instructions Use this camera in the following order Getting to know your camera Before connecting the camera to a PC, via the USB cable, you will need to set up the camera driver. Install the camera driver that is contained in Application software CD-ROM. (p. 14) Thank you for buying a Samsung Digital Camera. Prior to using this camera, please read the user manual thoroughly. [. . . ] Select an image that you want to delete by pressing the LEFT / RIGHT button and press the DELETE( ) button. A message will display as shown alongside on the LCD monitor. Select the sub menu values by pressing the LEFT / RIGHT button and then press the OK button. If [Yes] is selected : deletes the selected images. If [No] is selected : cancels "Delete Image". * In some instances the camera may not connect to the printer, this will depend on the make of the printer. Confirm:OK Deleting Images in Thumbnail Display Mode 1. Use the UP, DOWN, LEFT, and RIGHT buttons to select the image you want to delete, and then press the DELETE ( ) button. A message will display on the LCD monitor as shown below. Select the sub menu values by pressing the LEFT / RIGHT button and then press the OK button. If [Yes] is selected : deletes the selected images. If [No] is selected : cancels "Delete Image". Press the delete button. - After the connection, the Easy printing menu will display on the LCD monitor. To display the PictBridge menu, press the Menu button. For more information about the PictBridge menu, refer to page 49. IMAGES One Pic All Pics Exit:MENU Move: Delete?Yes No Confirm:OK INFORMATION Before deleting images from the camera, you should protect or download images to your computer that you wish to keep. 40 Left / Right / Menu / OK button LEFT / RIGHT / MENU / OK buttons activate the following. - LEFT button : While the menu is showing, press the LEFT button to select the menu tab to the left of the cursor. While the menu is not showing, press the LEFT button to select the previous image. Setting up the play back function using the LCD monitor PLAY mode functions can be changed by using the LCD monitor. In the PLAY mode, pressing the MENU button displays the menu on the LCD monitor. The menus you can set up in Play mode are as follows. To capture an image after setting up the play menu, press the PLAY mode button or shutter button. Menu tab Main menu Sub menu Show SLIDE Interval Effect Select All Pics Select All Pics 2816 X 2112 2592 X 1944 2272 X 1704 RESIZE 2048 X 1536 1600 X 1200 1024 X 768 640 X 480 User Image 1, 2 Secondary menu Play / Repeat Play 1, 3, 5, 10 sec OFF p. 43~44 Page - RIGHT button : While the menu is showing, press the RIGHT button to select the menu tab to the right of the cursor, or to move to a secondary menu. While the menu is not showing, press the RIGHT button to select the next image. - MENU button : When you press the MENU button, the play mode menu will be displayed on the LCD monitor. Pressing it again will return the LCD to the initial display. [. . . ] (You must install the Movie clip codec) Correct Disposal of This Product Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. [. . . ]