User manual SAMSUNG DIGIMAXU-CA 5

[. . . ] ENGLISH User's Manual Thank you for buying a Samsung Camera. This manual will guide you through using the camera, including capturing images, downloading images and using the application software. Please read this manual carefully before using your new camera. Instructions Use this camera in the following order Before connecting the camera to a PC, via the USB cable, you will need to set up the camera driver. Install the camera driver that is contained in Application software CD-ROM. [. . . ] If [Delete] is selected : deletes the selected images. If [Cancel] is selected : cancels "Delete Image". Press the DELETE button. Delete?Delete Cancel Confirm:OK INFORMATION Before deleting images from the camera, you should protect or download images to your computer that you wish to keep. 67 Setting up the play back function using the LCD monitor PLAY mode functions can be changed by using the LCD monitor. In the PLAY mode, pressing the MENU button displays the menu on the LCD monitor. The menus you can set up in Play mode are as follows. To capture an image after setting up the play menu, press the PLAY mode button or shutter button. Menu tab Main menu Sub menu Start Interval Slide Repeat Effect Effect 1, 2, 3, 4 Select Protect All Pics Delete Select All Pics 2272 x 1704 2048 x 1536 1600 x 1200 Resize 1024 x 768 640 x 480 User Image Right 90° Left 90° Rotate 180° Horizontal Vertical Standard DPOF Index Size p. 73 Select/ All Pics/ Cancel No/ Yes Select/ All Pics/ Cancel p. 72 Secondary menu 1, 3, 5, 10sec Off / On Cancel p. 71 Page 68 Setting up the play back function using the LCD monitor This menu is available while the camera is connected to a PictBridge supporting printer (direct connection to the camera, sold separately) with a USB cable. Menu tab Main menu Images Sub menu One Pic All Pics No Yes Secondary menu - Page p. 80 Auto Postcard 4X6 Auto Set Size 2L A4 Letter A3 Auto Full Custom Set Layout 1 2 4 8 9 16 Auto Plain Type Photo Fastphoto p. 80 69 Setting up the play back function using the LCD monitor Menu tab Main menu Sub menu Secondary menu Auto Draft Quality Normal Fine Auto Custom Set Date Off On Auto File Name Off On Standard Print Index No DPOF Print Yes No Reset Yes Menus are subject to change without prior notice. 80 Page 70 Starting the slide show Images can be displayed continuously at pre-set intervals. You can view the slide show by connecting the camera to an external monitor. Press the play mode button and press the menu button. Press the LEFT/ RIGHT button and select the [Slide] menu tab. Slide Start Start the slide show: The slide show can start only in the Interval 1 sec [Start] menu. Use the Up/Down buttons to select the [Start] menu. Press the OK button to start the slide show. - Press the Pause button to pause the slide show. - Press the Pause button ( ) again to resume the slide show. - To stop the slide show, press the play & pause button, and then press the LEFT or RIGHT button. [. . . ] Double-click on the entry with the question (?) or exclamation (!) mark, click the "Driver" tab, and click [Update Driver] or [Reinstall Driver]. If a message appears asking you to specify the location of the appropriate device driver, specify "USB Driver" in the CD supplied. 130 FAQ When the movie clip doesn't play back on the PC When the movie clip recorded by the camera doesn't play back on the PC, the causes are mostly codec installed on the PC. When A codec for play back the movie clip isn't installed Install the codec as listed below. [Installing a codec for Windows] 1) Insert the CD provided with the camera 2) Run the windows explorer and select [CD-ROM drive:\Xvid] folder and click the Xvid1. 0. 2. exe file. [. . . ]