User manual SAMSUNG DIGIMAXU-CA4

[. . . ] ENGLISH User's Manual Thank you for buying a Samsung Camera. This manual will guide you through using the camera, including capturing images, downloading images and using the application software. Please read this manual carefully before using your new camera. Instructions Use this camera in the following order Before connecting the camera to a PC, via the USB cable, you will need to set up the camera driver. Install the camera driver that is contained in the Application S/W CD-ROM. (p. 94) Set up the camera driver Take a picture (p. 21) Take a picture Insert the USB cable Insert the supplied USB cable into the PC's USB port and the camera's USB connection terminal. (p. 109) Check the camera's power Check the camera's power If the power is turned off, press the camera button to power it on. (p. 24) Check [Removable Disk] Open Window s EXPLORER and search for [Removable Disk]. (p. 110) To play back a video shot with this camera, be sure to use the QuickTime player supplied on the software CD-ROM. [. . . ] When [COMPUTER] is selected in step 5, the [PLEASE WAIT USB:COMPUTER] message appears in the camera when connecting the camera to the printer. In this case, disconnect the USB cable from the camera. Next, repeat the processes from step 2. 58 PictBridge: Picture Selection You can select the scope of the PictBridge function. The USB menu must be set to [PRINTER] before you connect the camera to the printer. (See p. 58) PICTBRIDGE 2. Use the UP and DOWN buttons to select [IMAGES], and PRINT then press the RIGHT button. Use the UP and DOWN buttons to select the desired submenu value, and then press the OK button. When [ONE PIC] is selected : The PictBridge function will be applied only to the picture currently displayed. When [ALL PICS] is selected : The PictBridge function will be applied to all pictures, excluding movie clips and voice files. Setting the Number of Copies to Print - Select [ONE PIC] or [ALL PICS]. A screen where you can set the number of copies to print will appear as shown below. 01 PRINTS 01 PRINTS EXIT:SH1 MOVE PIC: SET:OK EXIT:SH1 MOVE PIC: SET:OK [ When [ONE PIC] is selected ] [ When [ALL PICS] is selected ] - Use the UP and DOWN buttons to select the number of copies to print and then press the OK button. The number of copies you wish to make: 30 Unless you press the OK button, the changed number of prints will not be applied. - When selecting [ONE PIC] in Step 4, you can use the LEFT and RIGHT buttons to move to the previous or next picture. - Press the SHUTTER button to return to the PictBridge menu. 59 PictBridge: Print Setting You can select the Paper Size, Print Format, Paper Type, Print Quality, Date Print, and File Name Print menus for printed pictures. The USB menu must be set to [PRINTER] before you connect the camera to the printer. (See p. 58) PICTBRIDGE 2. Use the UP and DOWN buttons to select [PRINTER PRINT CUSTOM SETUP], and then press the RIGHT button. Use the UP and DOWN buttons to select the desired submenu value, and then press the OK button. If [DEFAULT] is selected CUSTOM : The print format will be set to the printer's default SIZE POSTCARD values. LAYOUT 4X6 If [CUSTOM] is selected PAPER 8X10 QUALITY A6 : A window from which the user can set up the print DATE A4 format with the desired values will appear. BACK: SET:OK Use the UP and DOWN buttons to select a submenu value, and then press the RIGHT button. Use the UP and DOWN buttons to select the desired auxiliary menu, and then press the OK button. The menus you can set up are as follows: Menu SIZE LAYOUT PAPER QUALITY DATE FILENAME Function Setting the size of the printing paper Setting the number of pictures to be printed on a sheet of paper Setting the quality of the printing paper Setting the quality of the picture to be printed Setting whether to print the date Setting whether to print the file name Sub menu POSTCARD, 4X6, 8X10, A6, A4, B5 FULL, 1, 2, 4, 6, 8, INDEX PLAIN, PHOTO, FASTPHOTO DRAFT, NORMAL, FINE OFF, ON OFF, ON Depending on the manufacturer and model of your printer, some menus are inaccessible. Even though these menus will still appear on the LCD monitor, but you will not be able to select them. 60 PictBridge: Picture Printing Printing Pictures 1. The USB menu must be set to [PRINTER] before you connect the camera to the printer. (See p. 58) 2. [. . . ] Do the following to check [Universal Serial Bus controllers]. Win 98/ME : Trace [Start Settings Control Panel System Device Manager Universal Serial Bus controllers]. Win 2000 : Trace [Start Settings Control Panel System Hardware Device Manager Universal Serial Bus controllers]. 123 FAQ : Trace [Start Control Panel Performance and Maintenance System Hardware Device Manager Universal Serial Bus controllers]. There must be USB Host Controller and USB root hub under [Universal Serial Bus controllers]. [. . . ]