User manual SAMSUNG DMS400THX

[. . . ] DMS400TH Dishwasher user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www. samsung. com/global/register UserManual-DMS400TH_EN-Australia. indd 1 2010-07-01 6:16:56 features of your new samsung dishwasher Your new Samsung Dishwasher will change the way you feel about doing dishes. From its large capacity to its energy efficiency, your new Samsung dishwasher has all the features to make your chores much less mundane. Powerful 3 washing spray arms spraying 6 ways Your Samsung dishwasher has 3 spray arms - top, upper, and lower arms. All 3 of the 2-way washing spray arms powerfully spray cleaning water in a total of 6 directions to improve the washing performance. 2. [. . . ] The indicator changes each time the button is pressed. The delay start time can be adjusted from 1 hour to 24 hours. If you want to use multi-functional detergent such as "2 in 1", "3 in 1", and "4 in 1" detergent, select a program and then press this button. (The 4 in 1 function is only available when selecting the Daily, Normal, Pots&Pans, Crystal and Quick programs. ) Though the "Rinse Refill" indicator is lit while the 4 in 1 function is activated, you do not have to add rinse detergent to the rinse aid dispenser. Press this button to use the sterilization function by increasing the heat by 80 degrees during the final rinse cycle. This function is only available when selecting the Daily, Pots&Pans, Normal, courses or the 4 in 1 function. For small loads, only use the top or bottom basket to save energy. Pressing the button cycles between selecting the top or bottom basket. 2 pROGRAm SeleCTOR 3 dISplAy 4 delAy START 5 4 in 1 6 STeRIlIZATION 7 1/2 12_ setting up your dishwasher UserManual-DMS400TH_EN-Australia. indd 12 2010-07-01 6:16:57 10 01 setting up your dishwasher 3 8 4 plUS 5 6 7 8 9 Use the plus button to add the drying and rinse cycles to the original course. If the program has already started, this button is deactivated. Press this button to start the selected program. When the door is opened while the dishwasher is operating, the Pause function is activated. If you want to reset the selected program, open the door and press the Start/Reset button for 3 seconds. The Child Lock function allows you to lock the buttons so that the wash cycle you've chosen can't be changed. If you want to activate or deactivate the Child Lock function, press the Sterilization button for 3 seconds. All buttons will be locked and "L" will be displayed when this feature is activated. 9 START/ReSeT 10 ChIld lOCK · A wash program must be selected only before starting an operation, and the selected program can not be changed during an operation. · If you want to change the program after starting an operation, open the door and press the Start/Reset button for 3 seconds to reset the selected program . Then, change the program. · As this dishwasher is a built-in model, you cannot use any buttons while the door is closed. To use any of the buttons, first open the door. · Each time you press the plUS button, the indicator icon will flash in the following sequence: "Additional Rinse +1 (7 min)" "Additional Rinse +2 (14 min)" "Additional Rinse +1, Additional Dry (37 min)" "Additional Rinse +2, Additional Dry (44 min)" "Additional Dry (30 min)". The total processing time will increase as much as the selected additional function. - For the Normal program, the processing time will increase by 5, 10, 20 minutes and back to 10 minutes in sequence. - For the Quick program, the "Additional Dry" option is not available so the total processing time will remain unchanged. [. . . ] Underload the dishwasher and use a rinse aid to minimize this. Remove the marks on the dishes using a low sensitivity cleaner. Clean the nozzle hole. Leaves a yellow or brown This occurs from coffee and tea film on the inside of the soils. Does not have any lamps The power is not connected. [. . . ]