User manual SAMSUNG DSB-4700F

[. . . ] DSB-4700F Instructions for use MF68-00325A REV. 1. 0 DIGITAL SATELLITE RECEIVER DIGITAL SATELLITE RECEIVER DSB-4700F Warning!Important Safety Instructions 1 DSB-4700F DSB-4700F Thank You for Choosing Samsung Thank you for choosing Samsung!Your new Samsung Digital satellite receiver represents the latest in IRD technology. [. . . ] Current event can be returned by pressing LAST key during moving events on this channel. When the TIMER key on the remote control is pressed in the EPG screen, if the current channel involves an event, timer is set immediately and the set timer is indicated on the EPG screen. A program that has been set in this way is indicated on Timer Field of Time & Timer Setting. 6. 4 Service Transponder 8. Subtitle When the current broadcasting program provides subtitle, press the GREEN(TEXT) key to see the current subtitle language list. If Subtitle is available on current program, is displayed on the banner after changing program(channel) or pressing RED( i ) key. To change the subtitle language: Press the RED( i ) key on the remote control unit to select the Transponder list. Press the RED( i ) key to switch between Transponder list and channel list. Use the / , PG+/PG- keys to select a Transponder group or a channel that you want. Press the GREEN(TEXT) key to see the subtitle language List. Use the / keys to select a subtitle language you want. Press the OK key and then the subtitle language you want is displayed. The menu display is carefully created and user friendly to assure the easy operation of the receiver by the user. 16 D I G I T A L S A T E L L I T E R E C E I V E R 17 DSB-4700F 9. Audio Mode To change the audio mode: DSB-4700F BASIC FUNCTIONS OPERATING THE RECEIVER Main Menu After installing your antenna system and STB with appropriate connectors. You can choose a mode among left, right or stereo using the BLUE(AUDIO) key. Press the BLUE(AUDIO) key to select the left, right or stereo. Press the EXIT key to save and escape from this menu. Plug in the AC main power and switch on the receiver. Press MENU key to bring up the main menu. The LED display will show "MENU". The following on screen display will appear: The sub menu topics will be displayed. For the sub-menus Installation, Channel Organising and Parental Lock you need the PIN Code. Before you begin with the "Installation" menu, you should check in the 4th menu "System Setup" whether all the information there is applicable for you. 10. Near Video on Demand (NVOD) If the changed channel is a NVOD service channel, [N] is displayed at the right corner on the banner. In this case, press the YELLOW(ALT) key. Select the desired time to watch using the / keys, and then press the OK key to watch the desired program. To see the help message, press the YELLOW(ALT) key. 1. Installation The menu provides settings for customizing, adding new services and displaying the status of the receiver. 11. Multi feed channel or subchannel If the changed channel is a multi feed service channel, [C] is displayed at the right corner on the banner. In this case, press the YELLOW(ALT) key. [. . . ] Press the Numerical (0~9) keys to set the time you want and press the / keys to choose a switch time you want to reserve. If set time on `Switch-on Time' is same as one on 'Switch-off Time', this timer works for 24 hours. Select TV program to set the event program by pressing / keys. When you press the TV/RADIO key, TV program and Radio program are toggled. [. . . ]