Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SAMSUNG DSB-9601C. We hope that this SAMSUNG DSB-9601C user guide will be useful to you.
Lastmanuals help download the user guide SAMSUNG DSB-9601C.
Detailed instructions for use are in the User's Guide.
[. . . ] Use a cloth lightly dampened with water(no solvents) to clean the exterior. Ensure that free airflow is maintained around the STB. Never store the STB where it is exposed to direct sunlight or near heating euipment e. g. Never stack other electronic equipment on top of the STB. [. . . ] To change the subtitle language:
Press the GREEN ( ) key to see the subtitle language List. Use the / keys to select a subtitle language you want. Press the key and then the subtitle language you want is displayed.
The menu display is carefully created and user friendly to assure the easy operation of the receiver by the user.
L
I
T
E
R
E
C
E
I
V
E
R
GB-13
BASIC FUNCTION
8. Teletext OSD
When the current broadcasting program provides Teletext OSD, press the GREEN ( ) key twice to see the current Teletext OSD list. To change the Teletext OSD:
Use the / keys to select a Teletext OSD you want. Press the key and then the Teletext OSD you want is displayed on the screen.
9. Teletext VBI
When the current broadcasting program provides Teletext VBI, press the GREEN ( ) key three times to see the current Teletext VBI list. To change the Teletext VBI:
Use the / keys to select a Teletext VBI you want. Press the key and then the Teletext VBI you want is displayed on the screen.
10. Audio Mode
You can choose a mode among left, right or stereo using the AUDIO key. To change the audio mode:
Press the AUDIO key to select the left, right or stereo. Select "Reset Positioner" and key to reset positioner.
L
I
T
E
R
E
C
E
I
V
E
R
GB-17
OPERATING THE RECEIVER
1. 3 Solarsat Setting
This menu is only for the Solarsat antenna. When you press this menu, you will get this message, "This menu is only for the Solarsat antenna. If you have one-press OK, otherwise-press EXIT. " You can set the value according to your location.
To set the Value of Date and Time, use the change the value. Use the / keys to move each filed.
/
keys to
1. 4 Auto Scanning
The sub menu "Auto Scanning" will enable download the channels automatically from the preprogrammed satellites. To download channels automatically: You can select All/Off/Only Free option mode in each satellite. Off : No Scan All : Scan all the channels Only Free : Scan free channels
Press
key.
Auto Scanning menu will be displayed. All the channels in the list from the selected satellite will be automatically downloaded. After scanning you will see "Your digital receiver found. . . " . Then, you should press key to store all channels into STB.
GB-18
D
I
G
I
T
A
L
S
A
T
E
L
OPERATING THE RECEIVER
1. 5 Manual Scanning
To tune-in new channels and weak signals, the STB has been provided with the option "Manual Scanning" where the channel data can be entered by the user. Manual Scanning" from the Installation Menu, the following screen will be displayed:
Select the target satellite for manual search. This option will enable the user to load any transponder from the preprogrammed list available within the receiver.
Note : Especially on New tranpsonder at Load TR, this new transponder can be added into transponder list so that you can use it on Auto Scanning later, only if at least one channel is found with this new transponder. [. . . ] Slave Box(Installing Box) : Menu Mode 4. Connect 2 Boxes with RS232 serial cable (Both end should have male connector) 5. Press 'OK' to start channel data copy Note : Use this function after removing SMART CARD or CAM modules.
GB-28
D
I
G
I
T
A
L
S
A
T
E
L
OPERATING THE RECEIVER
5. Common Interface
This STB is equipped with two PCMCIA slots, which enable the use of two CI-CAMS. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SAMSUNG DSB-9601C
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SAMSUNG DSB-9601C will begin.
