User manual SAMSUNG DTB-B270

[. . . ] 12 Adding a program to the timer list . 13 Switching off current timer functions . 20 2 CONTENTS Quick Start Guide Example TV set, rear panel UHF Aerial English Set Top Box Power Supply Adaptor (supplied) 12V DC Set Top Box Power Supply Adaptor (supplied) 12V DC VCR RF In connector Connecting to a Television SCART input on TV SCART cable (supplied) RF in connector SCART output to TV Set Top Box rear panel Connecting to a Television and Recorder UHF Aerial Example TV set, rear panel SCART input on TV SCART cable (supplied) RF In connector Set Top Box, rear panel RF Out connector RF cable SCART output to TV SCART to VCR SCART to SCART cable (not supplied) Example VCR set, rear panel VCR RF Out connector QUICK START QUIDE 3 Introduction English 4 Thank you for purchasing this product which has been designed and manufactured to give you many years of trouble-free service. About This User Manual This user guide contains all the information you need to know about how to setup and watch available 'Freeview' channels using your set top box. [. . . ] English Observe: - Long text displays on several pages. By repeatedly pressing the OK key, you browse the pages (arrow keys and are also possible). - If you press the INFO or arrow key , information on the next program is displayed. By pressing the arrow key , you return to the information on the current program. Note: The extended information banner is not automatically closed. 2 Press the EXIT key in order to close the information banner. Select a channel from a favourites list 1 Press the LIST/FAV key to display the first favourites list. 2 Press the LIST/FAV key again to display the next favourites list. 3 Inside a favourites list, select a channel by using the arrow keys or . 4 Press OK to watch the selected channel and press the EXIT key to close the list. Channel specific options Some channels provide options such as different camera angles, different languages or teletext. If a channel provides one or more of these options, the respective key name is displayed in the right corner when calling up the channel, whereby also several options can be displayed, e. TEXT and I-II. Channel information Every time you change the channel, an information banner is displayed. This means that, for instance, a sound, caption, or text selection is provided. - By pressing the TEXT key again, the teletext is transparently applied over the TV picture; pressing the key again, completely hides the teletext. - By using the BACK / P<P key, you switch between the teletext and transparent text. 2 Hide the teletext by pressing the EXIT or TEXT key. The following functions are offered to you by the EPG: - If you require more information on a program, highlight it by using the arrow key or , and press the INFO key. - Change to the program of another day by using the green key (next day) or the red key (yesterday). - Via the arrow keys and earlier or later in the day. , you can select programs - By pressing the channel + or - key, you can view the EPG for another channel. - If you want to adopt a program into the timer list, highlight it and press the TIMER key. Acknowledge the following request by pressing the OK key. Note: Detailed information on the subject "Timer" can be found in the next paragraph. 3 Close the EPG by pressing the EXIT key. Timer By means of the timer setting, you can switch your receiver on and off at a specific time, for instance, in order to allow for the recording with a video-tape recorder. [. . . ] Observe: - Selecting and altering the settings is carried out as usual by means of the arrow keys. - A displayed window can be closed by pressing the EXIT key. PIN lock Set this option to on if you want to protect your complete device against unauthorized access. When the receiver is switched on the next time, the PIN request is effected (the PIN code is set to 0000 by the factory). [. . . ]