User manual SAMSUNG DTB-P770

[. . . ] For best results, position your receiver away from radiators or other heat sources. Leave a space of at least 3 cm around the receiver for ventilation making sure that the ventilation holes are not obstructed. This receiver is intended for use in a domestic environment only and should never be operated or stored in excessively hot, humid or damp conditions. Make sure no objects or fluids enter the housing through the ventilation slots. [. . . ] - The 8, 9, + and *cursors indicate which navigation direction is possible. A grey coloured cursor means un-authorised navigation in the relevant cursor direction. Note: - The puck is always as shown besides the left menu window. 8. 2 Change the installation settings English Press MENU button to open the main menu. Press 9 button 4 times to bring the selection onto Installation. Note: If the Parental control is active, you need to enter your PIN code to access the relevant items of the selected menu option. Press the * button to access the Installation sub options. The selection is now on Receiver settings in the new Installation menu. 8. 2. 1 Receiver settings From the Installation menu, you selected Receiver settings and pressed * button. A new menu is displayed showing the following adjustments: - TV/VCR signal output. You can scroll down or up with the 9 or 8 button to choose the wanted option. For each option, you can press on * button to access its sub options. 8. 2. 1. 1 TV/VCR output allows you to select the signal format of the TV and VCR SCART sockets from the list below: - RGB/PAL-CVBS - RGB/SVHS - PAL-CVBS/PAL-CVBS - PAL-CVBS/SVHS - SVIDEO/PAL-CVBS - SVIDEO/SVHS Note: First word before / is dedicated to TV SCART. By activating the Sound output, a modulated sound will help you to define the best position of your antenna without requiring you to watch the TV screen. You can also select the UHF channel you want to use during the positioning process. C H A N G E T H E S E T T I N G S 23 English You can press the OK button to enable or disable the channel. IMPORTANT: All non-tagged channels are disabled and consequently not visible in all channel lists. 8. 2. 4 English 24 C H A N G E T H E S E T T I N G S Software To keep you up-to-date with the development in Digital Television and / or to make new features available, your receiver is prepared to receive software updates. Do not worry this update is part of normal transmissions. Simply follow the on screen instructions. Your receiver is automatically set up to accept upgrades for your DTR 1500. If you would like to be prompted each time a new upgrade is available, then switch the toggle to Manual. Note: Upgrades will enhance your box and help ensure the smooth operation of your receiver when new software is released. We advise that you accept any downloads that are offered. From Installation menu, you selected Software and pressed * button. A new menu is drawn to: - Indicate the current version of the software code. [. . . ] The SCART connection to the TV is incorrect or is loose. Your TV has not selected the correct AV/EXT channel. A timer is running, the receiver is locked, the front LED's are either Green / Red or Orange / Red The remote control batteries have been inserted incorrectly or are dead. You are not aiming your remote control at the receiver. The remote does not operate. You cannot find all the channels you think should be available. The signal to your aerial may be weak. [. . . ]