User manual SAMSUNG DTB-S500F

[. . . ] Before cleaning, disconnect the STB from the wall socket. Use a cloth lightly dampened with water(no solvents) to clean the exterior. Ensure that free airflow is maintained around the STB. Never store the STB where it is exposed to direct sunlight or near heating euipment e. g. [. . . ] This key is used to enter and confirm any data to the receiver in the menu system. Press while viewing TV and a list of channels is displayed. These keys are used to move the cursor to the up/down menu option. These keys are used to increase or decrease the volume. These keys are used to move the cursor to the left/right menu option. 9. VOL+/VOL- T R I A L R E C E I V E R GB-11 DTB-S500F 1. Display Screen Channel Number Signal Status BASIC FUNCTIONS Before you can view the television program, you must perform the installation. Therefore you will see only menu images at first. After the television channels have been programmed, you will see the following picture(banner) each time you switch channels: Program Information Current Favorite The number of soundtrack in current channel Press the red( i ) key in view mode. Select the channel by pressing the Numerical 0~9 keys or TV/RADIO key to move to TV or Radio channel. / keys and select the You will also see this picture each time you change channels. When you press the TV/RADIO key on the Remote Control Unit, TV and Radio program are toggled. Press the OK key and then the subtitle language you want is displayed. The menu display is carefully created and user friendly to assure the easy operation of the receiver by the user. T R I A L R E C E I V E R GB-15 DTB-S500F 8. Teletext OSD To change the Teletext OSD: BASIC FUNCTIONS When the current broadcasting program provides Teletext OSD, press the TEXT key twice to see the current Teletext OSD list. Use the / keys to select a Teletext OSD you want. Press the OK key and then the Teletext OSD you want is displayed on the screen. 9. Teletext VBI When the current broadcasting program provides Teletext VBI, press the TEXT key three times to see the current Teletext VBI list. To change the Teletext VBI: Use the / keys to select a Teletext VBI you want. Press the OK key and then the Teletext VBI you want is displayed on the screen. Note : A television with TV functions supported shall be used. The system shall operate with the subtitle turned off. 10. Audio Mode You can choose a mode among left, right or stereo using the AUDIO key. To change the audio mode: Press the AUDIO key to select the left, right or stereo. Press the EXIT key to save and escape from this menu. GB-16 D I G I T A L T E R R E S DTB-S500F OPERATING THE RECEIVER Main Menu After installing your antenna system and DTB-S500F with appropriate connectors. Plug in the AC main power and switch on the receiver. [. . . ] / keys : Adjusting in increment of 0. 5sec. Pg+/Pg- keys : Adjusting in increment of 1 sec. Set the DVB subtitle : ON/OFF T R I A L R E C E I V E R GB-25 DTB-S500F 4. 3 Media Settings OPERATING THE RECEIVER You can set the various media settings you want. Place the cursor on this sub menu and press the OK key. Press the / keys to move the sub items and press the / keys to select the option. [. . . ]