User manual SAMSUNG DV2C6BGW/XAA

[. . . ] Gas and Electric Dryer Owner's Manual Register your product at www. samsung. com/global/register Code No. : DC68-02312A-04_EN Features Extra Large Capacity Ultra washing and drying are at your fingertips!Now you can do extra-large loads in both the washer and dryer. capacity dryer circulates more air through your clothes getting them dry faster, for a wrinkle-free result. Various Drying Cycles & Fuzzy Logic Algorithm Simply turn the Jog Dial to select one of the 11 automatic drying cycles, including normal, heavy duty and towels. Or let Fuzzy Logic Control measure the degree of dampness and automatically set the drying time. [. . . ] If bubbles appear, tighten the connections and recheck. DO NOT use an open flame to check for gas leaks. A-8 SAMSUNG Dryer Owner's Instructions Installation Instructions 3-WIRE SYSTEM CONNECTIONS 1. Loosen or remove center terminal block screw. Connect neutral wire (white or center wire) of the power cord to the center, silver-colored terminal screw of the terminal block. Connect the other wires to outer terminal block screws. Insert tab of terminal block cover into your dryer's rear panel slot. Neutral grounding wire (green/yellow) 3. Center silver-colored terminal block screw 4. 3/4" (1. 9 cm) UL-listed strain relief WARNING: If converting from a 4-wire electrical system to a 3-wire, the ground strap must be reconnected to the terminal block support to ground the dryer frame to the neutral conductor. 4-WIRE SYSTEM CONNECTIONS 1. Connect ground wire (green or unwrapped) of power cord to external ground conductor screw. Connect neutral wire (white or center wire) of power cord and appliance ground wire (green with yellow stripes) under central screw of the terminal block. Connect the other wires to outer terminal block screws. Insert tab of terminal block cover into your dryer's rear panel slot. Green or bare copper wire of power cord 3. Center silver-colored terminal block screw 5. With a level, check your dryer and make necessary adjustments to the leveling legs. At this time, make sure all gas connections (on gas models), exhaust and electrical connections are complete. Plug in your dryer, and check operation by using the checklist below. (GAS MODELS ONLY) The burner may not ignite initially due to air in the gas line. Allowing your dryer to operate on a heat setting will purge the line. If the gas does not ignite within 5 minutes, turn your dryer off and wait 5 minutes. Be sure the gas supply to your dryer has been turned on. [. . . ] To receive warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG's authorized service center. SAMSUNG will provide in-home service during the warranty period at no charge, subject to availability within the contiguous United States. [. . . ]