User manual SAMSUNG DV50F9A8EVP/AC

[. . . ] Imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service or accessory parts, please register your product at or contact www. Extra Large Capacity Ultra drying capabilities are at your fingertips!Ft capacity dryers circulate more air through your clothes, drying them faster, for a wrinkle-free result. [. . . ] Screw on coupling by hand until it is seated on fill valve connector. Using pliers, tighten the coupling with an additional two-thirds turn. Do not overtighten, as it may damage the coupling. Check for leaks around “Y” connector, faucets and hoses. The exhaust ductwork is hooked up and the joints are taped. You have used rigid or stiff-walled flexible metal duct material, not plastic flexible duct. The dryer is level and is sitting firmly on the floor. For gas models: The gas is turned on and there are no gas leaks. Start your dryer to confirm that it runs, heats, and shuts off. Indd 19 2013-1-25 9:26:49 installing your dryer Vent blockage test (DV50F9A7E(G)*, DV50F9A6E(G)*) After the dryer is installed, start the Test to check if the exhaust system is applicable for the dryer. Vent Blockage Test detects duct state of the dryer automatically and report blockage state of the duct to the user. Proper duct state can help users to reduce drying time and save energy. vent Blockage Test must run at cool state. If it warms up after installation check, Run the Air fluff cycle for several minutes, so as to reduce its internal temperature. Check if the drum is empty and close the door. (If there is any clothes or other item in the drum, correct diagnosis can’t be made. Press the power button to turn the dryer on, then press and hold both the Adjust time Up and Dry level buttons simultaneously for 3 seconds. When entering the Test mode, “InS” will appear in the display. (If other procedure is started before entering the Test mode, it’s unable to enter the Test mode. Starting diagnosis immediately after pressing the Start button, During diagnosis, the operation state is displayed in the form of “0000“. Don’t open the door during diagnosis. If state of the exhaust system is normal, “End” appears and completion sounds is given. [. . . ] This warranty gives you specific rights, and you may also have other rights, which vary from state to state. Com Visits by a Service Engineer to explain functions, maintenance or installation is not covered by warranty. Please contact your Samsung call agent for help with any of these issues. (SAMSUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of: One (1) year part and labor This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the Canada. [. . . ]