User manual SAMSUNG DVD-C450

[. . . ] Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www. Setting up - Refer to the identification label located on the rear of your player for its proper operating voltage. - Install your player in a cabinet with adequate ventilation holes. [. . . ] If you press the SKIP ( ) button, it moves to the beginning of the chapter. One more press makes it move to the beginning of the previous chapter. - When playing a CD, if you press the SKIP ( ) button, it moves to the next track. If you press the SKIP ( ) button, it moves to the beginning of the track. One more press makes it move to the beginning of the previous track. Press the /® buttons to make the desired setup and then press the ENTER button. To access the desired title when there is more than one in the disc. For example, if there is more than one movie on a DVD, each movie will be identified. Most DVD discs are recorded in chapters so that you can quickly find a specific passage. allows playback of the film from a desired time. You must enter the starting time as a reference. The time search function does not operate on some disc. refers to the subtitle languages available in the disc. You will be able to choose the subtitle languages or, if you prefer, turn them off from the screen. A DVD disc can have up to 32 different subtitles. In the example, the soundtrack is played in English 5. A DVD disc can have up to eight different soundtracks. Some DVD discs are have more angle function from any picture. Bookmark function make you easily and quickly to find a track or chapter from DVD or CD. This feature allows you to repeat scenes slowly containing sports, dancing, musical instruments being played etc. Press the SEARCH ( ) button to choose the play speed between 1/2, 1/4, 1/8 and 1/16 of normal during PAUSE. - Each time you press the /® button, the screen size changes. [. . . ] With the unit in stop mode, press the MENU button on the remote control. Use the /® buttons to select Setup, then press the or ENTER button. To make the setup screen disappear after setting up, press the MENU button again. Note Depending on the disc, some Setup Menu selections may not work. [. . . ]