User manual SAMSUNG DVD-C460

[. . . ] (7~10cm) Do not block ventilation holes on any of the components for air circulation. - Be sure to turn all components off before moving the player. - Before connecting other components to this player, be sure to turn them off. - Be sure to remove the disc and turn off the player after use, especially if you are not going to use it for a long time. [. . . ] - If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input. After plugging in the player, the first time you press the DVD POWER button, : If you want to select a language, press a / button then press ENTER (This screen will only appear when you plug in the player for the first time. ) If the language for the startup screen is not set, the settings may change whenever you turn the power on or off. Therefore, make sure that you select the language you want to use. Once you select a menu language, you can change it by pressing the / button on the front panel of the unit for more than 5 seconds with no disc in the unit. Then the SELECT MENU LANGUAGE window appears again where you can reset your preferred language. During play, you can search quickly through a chapter or track, and use the skip function to jump to the next selection. Searching through a Chapter or Track During play, press the SEARCH ( or ) button on the remote control for more than 1 second. Note - The speed marked in this function may be different from the actual playback speed. - No sound is heard during search mode (Except CD). - When playing a DVD, if you press the SKIP ( ) button, it moves to the next chapter. For graphics of the screen sizes and the sequence in which the sizes change, see the next column. If you are using a 16:9 TV For 16:9 aspect ratio discs - WIDE SCREEN - SCREEN FIT - ZOOM FIT For 4:3 aspect ratio discs -Normal Wide -SCREEN FIT -ZOOM FIT -VERTICAL FIT If you are using a 4:3 TV For 16:9 aspect ratio discs - 4:3 Letter Box - 4:3 Pan Scan - SCREEN FIT - ZOOM FIT For 4:3 aspect ratio discs - Normal Screen - SCREEN FIT - ZOOM FIT - You can also use the Disc Menu, using the DISC MENU button on the remote control. - Title Menu will only be displayed if there are at least two titles in the disc. You can select a desired audio language quickly and easily with the AUDIO button. Press the REPEAT A-B button on the remote control at the point where you want repeat play to start (A). Press the REPEAT A-B button on the remote control at the point where you want the repeat play to stop (B). To return to normal play, press the REPEAT A-B then press the ENTER button until the display shows Repeat : Off. Note - A-B REPEAT does not allow you to set point (B) directly after point (A) has been set. Note - This function depends on audio languages are encoded on the disc and may not work. You can select a desired subtitle quickly and easily with the SUBTITLE () button. - This function depends on what subtitles are encoded on the disc and may not work on all DVDs. [. . . ] - Some discs may not contain the language you select : in that case the disc will use its original languange setting. Audio Options allows you to setup the audio device and sound status settings depending on the audio system in use. With the unit in stop mode, press the MENU button. The Setup menu lets you customize your DVD player by allowing you to select various language preferences, set up a parental level, even adjust the player to the type of television screen you have. [. . . ]