User manual SAMSUNG DVD-E438

[. . . ] DVD-E138B(000153N)cover 8/13/03 10:54 AM Page 2 DVD Player DVD-E138B DVD-E238 DVD-E338K DVD-E438K ENG AK68-00153N DVD-E138B(000153N)CDM-1 8/13/03 10:55 AM Page 2 Precautions Setting up 1. Setting up Ensure that the mains supply in your house complies with that indicated on the identification sticker located at the back of your play. Install your player horizontally, on a suitable base (furniture), with enough space around it for ventilation (7~10cm). Make sure the ventilation slots are not covered. [. . . ] · How to have the same subtitle language come up whenever you play a DVD; Refer to "Setting Up the Language Features" on page 46. 30 31 DVD-E138B(000153N)CDM-1 8/13/03 10:55 AM Page 32 Changing the Camera Angle When a DVD contains multiple angles of a particular scene, you can select the Angle function. Using the ANGLE button Press the ANGLE button to see if an ANGLE ( ) mark is present at the upper left hand corner of the screen. Using the Instant Replay/Skip Function Using the Instant Replay function (DVD) If you miss a scene, you can see it again using this function. If you press the I. REPLAY button, the current scene moves backward about 10 seconds, and plays back. - Depending on the disc, the Instant Replay function may not work. 1 When an ANGLE mark is shown, press the ANGLE button, then an ANGLE select icon will appear at the upper left hand corner of the screen. LEFT/RIGHT 2 Use the screen angle. buttons to select the desired off the 3 To turnagain. display, press the ANGLE button ADVANCED FUNCTIONS Using the Instant Skip function (DVD) Use this function to skip playback 10 seconds ahead of the current scene. Press the I. SKIP button. - Playback will skip ahead 10 seconds. - Depending on the disc, this feature may not work. 32 33 DVD-E138B(000153N)CDM-2 8/13/03 10:56 AM Page 34 Using the Bookmark Function This feature lets you bookmark sections of a DVD or VCD (MENU OFF mode) so you can quickly find them at a later time. Using the Bookmark Function (DVD/VCD) Using the Zoom & 3D Sound Functions Using the Zoom Function (DVD) play or 1 During remote. pause mode, press the ZOOM button on the A zoom mark will be displayed on screen. 1 LEFT/RIGHT 2 Use the bookmark icon. buttons to move to the desired you reach want mark, 3 When the ENTERthe scene youicon willtochange to press button. The a number (1, 2, or 3). During play, press the BOOKMARK button on the remote. The Bookmark icons will be displayed. ENTER the UP/DOWN or LEFT/RIGHT buttons to 2 Usepart of the screen you want to zoom in on. select the 3 Press the ENTER button. - During DVD play, press ENTER to zoom in 2X/4X/2X/Normal in order. - During VCD play, press ENTER to zoom in 2X/Normal in order. 4 Press the BOOKMARK button to turn off the display. Recalling a Marked Scene ADVANCED FUNCTIONS Using the 3D Sound Function The simulated surround effect depends on the disc contents. If you connect the unit to your stereo system, you can enhance sound quality and produce a greater surround effect. This feature is useful when you are using the DVD player with a two channel stereo through the analog outputs. (Discs which are recorded with LPCM or DTS will not work. ) the 1 During play, pressmark 3D button. on The 3D SOUND will be displayed screen. · Up to three scenes may be marked at a time. · When in VCD 2. 0 mode (MENU ON mode), this function does not work. · Depending on the disc, the Bookmark function may not work. 1 During play, press the BOOKMARK button on the remote. Off 1­­ CLEAR LEFT/RIGHT 2 Use the scene. buttons to select a marked the PLAY/PAUSE 3 Press marked scene. ( to the ) buttons to skip NOTE · 3D Sound is possible only on discs recorded using DOLBY SURROUND or DOLBY DIGITAL. However, some of these discs do not contain rear channel sound signals. · Depending on the disc, the Zoom and 3D Sound functions may not work. Clearing a Bookmark play, press 1 During remote. [. . . ] · Check whether the disc being played has the "Dolby 5. 1 ch" mark on the outside. · Check if your audio system is connected and working properly. · In a SETUP Menu, is the Audio Output set to Bitstream?· The features or action cannot be completed at this time because: 1. [. . . ]