User manual SAMSUNG DVD-H1080W

[. . . ] Do not stack other, or heavy devices on top of the player. Do not place the player on amplifiers or other equipment which may become hot. Before moving the player ensure the disc tray is empty. This player is designed for continuous use. [. . . ] (A) 4 Press the REPEAT A-B button to select the point where the function ends. (B) ADVANCED FUNCTIONS NOTE · This function may behave differently depending on the type of disc. NOTE · The disc will play from A to B repeatedly at the speed you chose. · To terminate the function, press the CLEAR button or the REPEAT A-B button again. · A-B REPEAT does not allow you to set point (B) until at least 5 seconds has elapsed after point (A) has been set. 22 23 00228A/DVD-E217-1 9/2/03 5:15 PM Page 24 Selecting the Audio Language You can select a desired language quickly and easily with the AUDIO button. Selecting the Subtitle Language You can select a desired subtitle quickly and easily with the SUBTITLE button. Using the SUBTITLE button Using the AUDIO button DVD 1 Press the AUDIO button. LEFT/RIGHT 2 Use the language on abuttons to select the desired DVD. - The audio languages are represented by abbreviations. 1 Press the SUBTITLE button. LEFT/RIGHT buttons 2 Use the subtitle language. to select the desired buttons to determine 3 Use the UP/DOWNsubtitle will be displayed. whether or not the - Initially, the subtitling will not appear on screen. - The subtitle languages are represented by abbreviations. 3 Use the LEFT/RIGHT buttons to select Stereo, LEFT or RIGHT. (On VCD/CD) VCD/CD ADVANCED FUNCTIONS NOTE · This function depends on what languages are encoded on the disc and may not work with all DVDs. · A DVD disc can contain up to 8 audio languages. Press the MENU button to turn off the display. 28 NOTE · Up to three scenes may be marked at a time. · When in VCD 2. 0 mode (MENU ON mode), this function does not work. · Depending on the disc, the Bookmark function may not work. Using the 3D Sound Function DVD The simulated surround effect depends on the disc contents. If you connect the unit to your stereo system, you can enhance sound quality and produce a greater surround effect. This feature is useful when you are using the DVD player with a two channel stereo through the analog outputs. (Discs which are recorded with LPCM or DTS will not work. ) 1 During play, press the INFO button. Use the UP/DOWN buttons to select the 3D Sound. NOTE · 3D Sound is possible only on discs recorded using DOLBY SURROUND or DOLBY DIGITAL. However, some of these discs do not contain rear channel sound signals. · Depending on the disc, the Zoom and 3D Sound function may not work. 2 Press the LEFT/RIGHT buttons to turn the 3D Sound feature On or Off. 29 00228A/DVD-E217-2 9/2/03 5:16 PM Page 30 MP3/WMA Play When an MP3/WMA Disc is inserted into the DVD player, the first song file of the first folder plays. · If more than two file extensions are present, select the media of your choice by pressing UP/DOWN, then press the ENTER button. · To change the currently playing media, press the STOP ( ) button twice and then press the DISC MENU button. [. . . ] · Ensure that the disc is installed with the label side facing up. · Check the region number of the DVD. · 5. 1 channel sound is reproduced only when the following conditions are met. : 1) The DVD player is connected with the proper amplifier 2) The disc is recorded with 5. 1 channel sound. [. . . ]