User manual SAMSUNG DVD-HD1000

[. . . ] DVD PLAYER DVD-HD1000 HEADQUARTERS 105 Challenger Road, Ridgefield Park, N. J. 07660-0511 TEL: 1-800-SAMSUNG SERVICE DIVISION 400 Valley Road, Suite 201, Mount Arlington, NJ 07856 1-800-SAMSUNG (1-800-726-7864) www. samsungusa. com AK68-00118B Safety Precautions WARNING To reduce the risk of fire or shock hazard, do not expose this DVD-HD1000 to rain or moisture. Setup CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates "dangerous voltage" inside the product that presents a risk of electric shock or personal injury. This symbol indicates important instructions accompanying the product. THIS PRODUCT UTILIZES A LASER. [. . . ] · S-Video: Provides a sharper picture than composite video by separating the color information (C) from the black and white information (Y). · Component Video: Provides the most clear and sharp picture by separating the signal into full-bandwidth black and white information (Y), blue information (Pb), and red information (Pr). 17 18 Method 2 Through S-Video Output Method 3 Through Color Component Video Output (480i) Use this method if your TV has COMPONENT VIDEO IN or DVD-Video input jacks. Connections TV S-Video Cable TV Color Component Output Cable Audio Cable Audio Cable 1 2 Connect the DVD player's AUDIO OUT (L/R) and S-VIDEO OUT to your TV's AUDIO IN and S-VIDEO IN. 1 2 Connect the DVD player's AUDIO OUT (L/R) and COMPONENT VIDEO OUT (480i) (Y, Pb, Pr) to your TV's AUDIO IN and COMPONENT VIDEO IN. Press the TV/VIDEO button on the remote control to set the TV to "S-Video". Press the TV/VIDEO button on the remote control to set the TV to "Component (DVD)" or "DVD". (Select the route according to your TV's User's guide) · Be sure to connect the DVD player's AUDIO OUT (L/R) to your TV. Otherwise, no sound will be heard. · Be careful not to mix up the connections for Y, Pb, and Pr. Otherwise, your screen may appear reddish or bluish. · Be sure to connect the DVD player's AUDIO OUT (L/R) to your TV. Otherwise, no sound will be heard. 19 20 Connecting Audio Components Method 4 Through Progressive/HD Video Output (Component Video Output 480p/720p/1080i) Use this method if your TV has COMPONENT VIDEO IN or DVD-Video input jacks. For listening through an audio component Connect as follows if you want to output video to your TV and audio to an audio component. 1 TV For 480p (progressive) output, set the video output select switch on the back of the unit to "480p". For 720p or 1080i output, set it to "720p" or "1080i". Connections 2 Color Component Output Cable Connect the DVD player's AUDIO OUT (L/R) and COMPONENT VIDEO OUT (Y, Pb, Pr) to your TV's AUDIO IN and COMPONENT VIDEO IN. Press the TV/VIDEO button on the remote control to set your TV to "Component (DVD)" or "Component (DTV)". (Select the route according to your TV's user's guide. ) 3 TV Color Component Output Cable Audio Cable · Be careful not to mix up the connections for Y, Pb, and Pr cords. Otherwise, your screen may appear reddish or bluish. On some TVs, DVD inputs are marked as color component video inputs. Video Cable · Be sure to connect the DVD player's AUDIO OUT (L/R) to your TV. Otherwise, no sound will be heard. Audio Component S-Video Cable What is DCDi? Audio Cable It is a video processing technology that eliminates jagged edges that appear when standard interlaced video is viewed on progressive-scan displays, producing smoother video images. · For 480P video output, your TV must support progressive scan input. · Also, for 720p/1080i video, you will need a TV that can receive HD video signal. · If supported, you will need to set the TV menu to enable progressive scan or HD input. · If playing a copy-protected DVD Disc, 720p output or 1080i output is automatically changed to 480p output. · Picture flickering may occur for 1~2 seconds during the shifting process. 21 22 1 2 For video signal, select one from the four methods shown on pages 18-21 and connect to your TV. Connect the DVD player's AUDIO OUT (L/R) to the audio component's AUDIO IN (L/R). Connecting to a Dolby Digital amplifier Connecting to an amplifier that supports Dolby Digital 5. 1 Channel Connection What is Dolby Digital? Dolby Digital is a system that maximizes the surround effect by improving upon existing 4 channel Pro Logic. It consists of a total of five channels: three front channels (left, center, and right), two rear channels (left and right), plus a Amplifier that LFE channel for the subwoofer. It is commonly supports Dolby Digital known as a 5. 1 channel system. 5. 1 Channel Surround Sound You can enjoy 5. 1 Channel Dolby Digital Soundtrack if you connect a Dolby Digital external amplifier with 5. 1 channel analog jacks to your DVD player. Connections Connect either one, but not both Connect either one, but not all Amplifier that supports Dolby Digital Video Cable TV Select one of three options TV Setting audio before playing a DVD If more than two speakers are connected to the DVD player as shown above, you will need to change Dolby Digital output from PCM to "Bitstream" in the inital audio setup in order to listen to Digital Surround Output. (See page 32 for setup instructions). 23 24 Setting the language preference before using the player First Turn on the TV and press the TV/VIDEO button to select the Video mode. Playing DVDs Press the OPEN/CLOSE button to open the disc tray. Press the POWER button. Place the disc in the disc tray. · Place the disc in the tray with the disc label facing up. Basic Operations Press the OPEN/CLOSE button. Press the DVD POWER button. · The following screen appears. (This screen appears only when the DVD player is used for the first time. ) · Use the remote control to set the number that corresponds to the desired language. [. . . ] This will reset the password and restore all menus to the initial factor settings. (However, this operation is possible only if the disc is removed from the player. ) 55 56 Troubleshooting Dolby Digital 5. 1 Channel Surround Sound is possible only if DVDs are recorded with "Dolby Digital 5. 1 Channel" and a Dolby Digital amplifier is connected to the DVD player. Check that the disc has "Dolby Digital 5. 1 Channel" mark. In the stop mode, press the SETUP button on the remote control to check that the audio setup in the initial setup is correct. [. . . ]