User manual SAMSUNG DVD-L200W

[. . . ] 00184V-L200W/XSH-ENG 8/25/03 11:12 AM Page 2 ENGLISH Notices and Safety Instructions Safety Instructions Be sure to read the safety and operating instructions before using this product. Keep this manual in a safe place for future reference. Be sure to adhere to all warnings on the product. 1. Unplug the power cord from the AC outlet before cleaning the unit. [. . . ] When an ANGLE mark is shown, press the ANGLE button, then an ANGLE select icon will appear at the upper left hand corner of the screen. Use the LEFT/RIGHT buttons to select the desired screen angle. To turn off the display, press the ANGLE button again. 40 00184V-L200W/XSH-ENG 8/25/03 11:12 AM Page 41 ENGLISH Using the Bookmark Function The Bookmark function lets you select parts of a DVD or VCD so that you can quickly find the section at a later time. Using the Bookmark Function (DVD/VCD) 1. During play, press the BOOKMARK button on the remote. Use the LEFT/RIGHT buttons to move to the desired bookmark icon. When you reach the scene you want to mark, press the ENTER button. The icon will change to a number (1, 2, or 3). Press the BOOKMARK button to turn off the display. ENTER Recalling a Marked Scene 1. During play, press the BOOKMARK button on the remote. Use the LEFT/RIGHT buttons to select a marked scene. Press the PLAY ( ) button to skip to the marked scene. 1­­ CLEAR Clearing a Bookmark 1. During play, press the BOOKMARK button on the remote. Use the LEFT/RIGHT buttons to select the bookmark number you want to delete. Press the CLEAR button to delete a bookmark number. Press the BOOKMARK button to turn off display. NOTE: · Up to three scenes may be marked at a time. · Depending on the disc, the Bookmark function may not work. 41 00184V-L200W/XSH-ENG 8/25/03 11:12 AM Page 42 ENGLISH Using the Zoom & 3D Sound Functions Using the Zoom Function (DVD/VCD) 1. During play or pause mode, press the ZOOM button on the remote. Use the UP/DOWN or LEFT/RIGHT button to select the part of the screen you want to zoom in on. - Press ENTER to zoom in 2X/4X/2X/Normal in order. (DVD) - Press ENTER to zoom in 2X/Normal in order. (VCD) Using the 3D Sound Function The simulated surround effect depends on the disc contents. If you connect the unit to your stereo system, you can enhance sound quality and produce a greater surround effect. This feature is useful when you are using the DVD player with a two channel stereo through the analog outputs. [. . . ] · Check that the DVD player is in the INPUT mode and not in the DVD mode. No picture and sound Distorted video or sound While in the input mode, no picture is output from the external component to the DVD player 59 00184V-L200W/XSH-ENG 8/25/03 11:12 AM Page 60 ENGLISH Troubleshooting Symptom DVD Video does not appear with a external component connected to the DVD player Dolby Digital audio volume is too low Battery pack Battery pack won't charge operation Check · Check that the TV is set to VIDEO or AV. · Check that the video or audio cable is securely connected. · Change the "Dynamic Compression" setting to "On". This will turn up the comparatively low volume level of Dolby Digital, which provides the most wide, dynamic sound range. [. . . ]