User manual SAMSUNG DVD-P365K

[. . . ] Infrared Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Display Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Deciding How to Connect DVD-VCR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Result: The timer programme is displayed. Press the " or buttons to select the required programme. Press the or buttons to select and change any values as required. For more details, refer to the previous page. On completion, press RETURN twice. RETURN DELETE:CLEAR When a cassette is loaded, the tape position is optimized automatically to reduce disturbance (Digital Auto Tracking). When playing a cassette, if the end of the tape is reached, the cassette is rewound automatically. NTSC tapes can be played back but cannot be recorded with this DVD-VCR. (EJECT). REC SELECT EJECT 3 To. . . Stop the playback Eject the cassette 3 COPY LINE IN 2 Adjusting Picture Alignment Automatically The Picture Alignment feature enables you to optimize the tape position automatically to obtain the best possible picture. VCR ANGLE 0 AUDIO VCR Cancelling a Preset Programme When noise bars or streaks appear during playback, adjust picture alignment by pressing the A. TRK button. You can cancel any programmes that are: x Incorrect x No longer required Result: x The tracking bar appears. x The picture is automatically adjusted. To return to normal playback mode, press the II button. Whilst in Picture Search mode, if you press the button again, the VCR will enter normal Fast Forward mode. Likewise, whilst in Picture Search mode, if you press the button again, the VCR will enter normal Rewind mode. If, when Redwinding ( or Fast Forwarding ( you press the ) ), (or button, the VCR will enter the Picture Search mode. ) The tape counter: x Indicates the elapsed time in the play and record modes (hours, minutes and seconds) x Is reset when a cassette is inserted in the DVD-VCR x Allows you to find the beginning of a sequence easily 2 3 1 2 If the remaining time is to be calculated correctly, you must indicate the type of cassette being used. 4 5 6 0:00:00 Insert a cassette in your DVD-VCR. To set the tape counter to zero at the beginning of a sequence: x Press DISPLAY twice to display the counter x Press CLEAR when you want to set the tape counter to zero When you are ready, x Start playback or Recording. x To fast-forward or rewind to the sequence at which the counter was set to zero, press or . 2 2 3 VCR Searching for a Specific Sequence Each time you record a cassette on this VCR, an "index" is automatically marked on the tape when recording starts. The Search function allows you to fast-forward or rewind to a specific index and start playback from that point. Depending on the direction selected, the indexes are numbered as follows: 1 Some DVD-VCR information, such as the counter, can be displayed on the television screen (unless you have deactivated the OSD mode; refer to page 28). Press DISPLAY: x Once to display the current function, programme number, recording speed, date, time and counter x Twice to display the counter only x Three times to display the time remaining on the cassette x Four times to clear the display Prev etc. 2 etc. INDEX : !!!! This VCR uses a standard indexing system (VISS). [. . . ] Remove the aerial input plug from the socket marked (aerial symbol) on the rear of the DVD-VCR. Carry out the instructions "Tuning Your Television for the DVDVCR" (see page 14). Carry out the instructions "Setting the DVD-VCR output Channel" (see page 23), move the channel number several channels down from the original setting. Replace the aerial plug into the socket marked (aerial symbol) on the rear of the DVD-VCR. [. . . ]