User manual SAMSUNG DVD-P370

[. . . ] DVD Player DVD-P370 www. samsung. com/sg PRECAUTIONS 1. Setting up - Refer to the identification label located on the rear of your player for its proper operating voltage. - Install your player in a cabinet with adequate ventilation holes. (7~10cm) Do not block ventilation holes on any of the components for air circulation. [. . . ] Press Audio button at remocon repeatedly to select the desired Audio on MPEG4 then press the ENTER . VCD Stereo AUDIO MPEG4 PCM 1/2 AUDIO Note - You have to change the desired subtitle in the Disc Menu, according to discs. - This function depends on what subtitles are encoded on the disc and may not work on all DVDs. - A DVD disc can contain up to 32 subtitle languages. - To have the same subtitle language come up whenever you play a DVD; Refer to "Using the Subtitle Language" on page 25. 19 English - To have the same audio language come up whenever you play a DVD; Refer to "Using the Audio Language" on page 25. Changing the Camera Angle When a DVD contains multiple angles of a particular scene, you can use the ANGLE function. Using the ANGLE button (DVD) If the disc contains multiple angles, the ANGLE appears on the screen. 1. During play, press the INFO button on the remote control. Press the / buttons to select Angle, then press the ENTER button. Using the Bookmark Function This feature lets you bookmark sections of a DVD or VCD (Menu Off mode) so you can quickly find them at a later time. Using the Bookmark Function (DVD/VCD) 1. During play, press the INFO button on the remote control. Press the / buttons or you can use the number buttons on the remote control to select the desired angle. 4/6 3. Press the / buttons to select Bookmark (except VCD), then press the ENTER button. When you reach the scene you want to mark, press the ENTER button. Up to three scenes may be marked at a time. 1-- Note - If the disc has only one angle, this feature won't work. Currently, very few discs have this feature. - Depending on the disc, these functions may not work. Using the Instant Replay/Skip Function Using the Instant Replay function (DVD) If you miss a scene, you can see it again using this function. If you press the INSTANT REPLAY button, the current scene moves backward about 10 seconds, and plays back. Note - When VCD 2. 0 is in Menu Off mode only, this function works. Select Menu Off by pressing the DISC MENU button. - Depending on a disc, the Bookmark function may not work. The first 1~3 steps are the same as those for "Using the Bookmark Function" on page 20. Press the / buttons to select a marked scene. 123 Using the Instant Skip function (DVD) Use this function to skip playback about 10 seconds ahead of the current scene. Press the INSTANT SKIP button. - Playback will skip ahead 10 seconds. 5. Press the PLAY/PAUSE ( scene. ) button to skip to the marked Clearing a Bookmark 1~3. The first 1~3 steps are the same as those for "Using the Bookmark Function" on page 20. [. . . ] · In a SETUP Menu, is the Audio Output set to Bitstream?· The features or action cannot be completed at this time because: 1. The DVD's software doesn't support the feature (e. g. , angles). The feature is not available at the moment. [. . . ]