User manual SAMSUNG DVD-R100

[. . . ] Instruction Manual DVD-R100 ENG AK68-00427Q-00 Getting Started Warning IMPORTANT NOTE The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug. If it requires replacing, a fuse approved to BS1362 of the same rating must be used. Never use the plug with the fuse cover omitted if the cover is detachable. [. . . ] Daily : Records at a set time every day. Before you start 1. Make sure the Clock has been set (Setup - System Setting) before you proceed with a timer recording. 1 Press the MENU button. 2 Press TIMER button and go to step 4 directly. Mode (Recording Mode) Press the . . . buttons to select "Programme" and then press the OK or button. DVD-RAM(VR) Standard Timer Programme - FR : Select when you want to set video quality automatically. It depends on the remaining time on the DVD. - XP (high quality) : Select when video quality is important. 1 hour) - SP (standard quality) : Select to record in standard quality. 2 hours) - LP (low quality) : Select when a long recording time is required. (Approx. 4 hours) Recording MOVE OK RETURN EXIT - EP (extended mode) : Select when a longer recording time is required. (Approx. 6 hours about 1. 2 Mbps) the . . . buttonsthen press the OK "Standard Timer" and or 4 Press the . . . buttons to selectthen press "Scheduled Record List", and the OK or button. DVD-RAM(VR) Scheduled Record List Remaining Recording Time 02:12 SP No. 01 Source --Date --/- Start End Type Mode Edit - --:-- -- --:-- -- -- MOVE OK RETURN EXIT DVD-RAM(VR) Scheduled Record List Remaining Recording Time 02:12 SP No. 01 Source Date ----/- Source PR 01 02 CH 05 12/10 Start Type 12 : 00 Once Start End Type Mode Edit No. 01 --:-- -- --:-- -- -- -- Date 01 JAN 12:30AM 09:00PM Weekly LP End 14 : 00 Mode SP MOVE OK RETURN EXIT English -41 6 Press the OK button. q will appear on the front panel. It means that a timer recording is registered. Editing a Standard Timer If you make a mistake Press the oe button to select the item you want to change. If the timer settings overlap The programs are recorded in order of priority. If timer recording is set for the first program and then again for the second program and both programs overlap, the following message will appear on the screen: "This setting is identical with 1"The message shows that the first program has priority. After recording of the first program is complete, the second program starts being recorded. To exit without saving the current setting Press the MENU button. To return to the previous menu Press the RETURN button if you don't want to set a timer recording. Follow these directions to edit the timer record list. 1 Press the MENU button. Press TIMER button and go to step 4 directly. buttons 2 Press the . . . and thento select OK or "Programme" press the button. DVD-RAM(VR) Programme 7 Recording Turn the power off to finish the Timer Recording setting. [. . . ] Check the regional code of the DVD disc. This DVD recorder cannot play some types of discs. (See page 5, 45. ) The angle operation does not work while playing a DVD disc. Checkpoint 2 Checkpoint 3 Checkpoint 1 The angle operation is available only when the disc contains images captured from different angles. icon appears on the screen. The selected audio and/or subtitle language is not played. Checkpoint 1 You cannot use this operation or function due to one of the following reasons: (1) Your DVD disc restricts it. [. . . ]