User manual SAMSUNG DVD-R130K

[. . . ] G For the best picture quality, if your TV has Component video jacks, you can use component cables instead of the yellow video connector on the Video/Audio cable. If the TV connected supports Progressive Scan, press the P. SCAN button on the front of the DVD Recorder to enjoy higher quality video. . . . AV amplifier (receiver) Cable box If you have an AV amplifier Connect either audio cables from the LINE AUDIO OUT jacks on the DVD Recorder to the LINE IN jacks on your AV amplifier, or a digital cable from the DIGITAL AUDIO OUT (COAXIAL or OPTICAL) jack on the DVD Recorder to the DIGITAL AUDIO IN jack on your AV amplifier. 2 00684A_quick guide_DVD 2/17/05 9:57 AM Page 3 Step Setup before proceeding petS Turn on your TV and any other connected equipment Input Selector Press the Input Selector on your TV remote control until the signal from the DVD Recorder appears on the screen. Wait!Make sure you complete Step with Step . After all connections are complete, plug the power cord in the wall outlet. [. . . ] This means that the current time is being set automatically (Auto Program) through the antenna under connection and also the channel is being set. When it normally operates, the current time is automatically set and displayed in the front panel display. You must have the antenna connected to automatically set the clock. For ease of use, we recommend that you complete the following settings before using the DVD Recorder. OSD Language Setup Press the DVD POWER button. The initial set up OSD language menu will appear. Turn on your TV and any other connected equipment Input Selector OSD(On-Screen Display) Language Setup Clock Set Channel Set Audio Setup Video Setup Select the desired language using the number buttons. Clock Set With the unit in Stop mode, press the MENU button. Select Setup using the . . . /buttons, then press the or ENTER button. Select System using the . . . / buttons, then press the or ENTER button. No Disc Timer Rec. Setup System Language Audio Video Parental Control Setup MOVE SELECT RETURN EXIT - No Disc Timer Rec. Setup Clock Set Channel Set CM Skip Time EP Mode Time : 15 Sec : 6 Hours : Off System MOVE Chapter Creator SELECT RETURN EXIT Select Clock Set using the . . . / buttons, then press the or ENTER button. No Disc Timer Rec. Setup Auto Clock Set Manual Clock Set Clock Set MOVE SELECT RETURN EXIT - Select Auto Clock Set using the . . . / buttons, then press the or ENTER button. Select On using the . . . / buttons, then press the or ENTER button. No Disc Timer Rec. Setup Auto Clock Set Clock Data CH Time Zone Daylight Saving Auto Clock Set : On Off : Automatic On : Automatic : Automatic MOVE SELECT RETURN EXIT The DVD Recorder automatically sets the clock by searching for a channel that carries a time signal and sets your time zone and daylight saving(if applicable). 3 00684A_quick guide_DVD 2/17/05 9:57 AM Page 4 If your clock is set to the wrong time zone or daylight saving, you can adjust these settings without turning off the Auto Clock Set function (see page 23). Setup Digital Output DTS : PCM : Off Audio Dynamic Compression : On DVD-RAM 4 00684A_quick guide_DVD 2/17/05 9:57 AM Page 5 Step Basic Operation before proceeding DVD-R : Formatting is unnecessary and only Video Mode Recording is supported. Wait!Make sure you complete Step with Step . The following instructions will give you a quick overview about how to use the DVD Recorder. Press the MENU button with the disc stopped. petS Formatting a Disc Recording the current TV program you are watching Making a Timer Recording Finalizing a Disc Press the . . . / buttons to select Disc Manager, and then press the ENTER or button. Press the . . . / buttons to select Disc Format, and then press the ENTER or button. DVD-RAM(VR) Title List Playlist Disc manager Timer Rec. Setup Disc Name Disc Protection Disc Format Delete All Title Lists : : Not protected Disc Manager MOVE SELECT RETURN EXIT G DVD-RAM(VR) You will be prompted with the confirmation message 'Do you want to format disc?'. Press the oe/ buttons to select Yes, then press the ENTER button. The DVDRAM disc is formatted. DVD-RAM(VR) Title List Playlist Disc Name Disc Protection : : Not protected Disc Manager Disc Format Disc manager Do you want to format disc?Yes No Setup MOVE SELECT RETURN EXIT DVD-RW G - You will be prompted with the confirmation message 'Choose the recording format for DVD-RW'. Press the oe/ buttons to select the desired format type, then press ENTER. The DVD-RW Disc is formatted. DVD-RW Title List Playlist Disc Name Disc Protection : Disc Manager : Not protected Disc manager Disc Format Choose the recording format for DVD-RW. DVD-VR DVD-V Setup MOVE SELECT RETURN EXIT Formatting a Disc When you insert a blank disc, you will be asked whether or not you want to format or initialize it. [. . . ] DVD-VR DVD-V Setup MOVE SELECT RETURN EXIT Formatting a Disc When you insert a blank disc, you will be asked whether or not you want to format or initialize it. Since available functions differ depending on the disc type, select a disc that best fits your preferences. DVD-RAM : Must be formatted. Unformatted Disc Do you want to format this disc?Yes No Recording the current TV program you are watching Press the OPEN/CLOSE button, and place a recordable disc on the disc tray. You can not change the recording mode or the channel while recording. Press the OPEN/CLOSE button to close the disc tray. Wait until "LOAD" disappears from the front panel display. I If a blank DVD-RAM or DVD-RW disc is used, you will be asked whether or not you want to format or initialize it. I DVD-RAM/DVD-RW discs should be formatted in advance DVD-RW : When Yes is selected, the mode will be formatted in VR mode. [. . . ]