User manual SAMSUNG DVD-R140MK

[. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. [. . . ] If you want to record a copy-once type program, use DVD-RW with CPRM in VR Mode. DVD-RW(VR mode) · This mode allows multiple editing functions (such as deletion of the whole title, partial deletion of a title, etc. ) · Various editing options using a created Playlist Media DVD-RW(Ver. 1. 1) with CPRM VR mode Video mode DVD-R Signal type Copy-Free O Copy-Once - Copy-Never - DVD-RW(Ver. 1. 1) O O O O* - When a "Copy Once" recording has been made, recording cannot be done anymore. 44 - English Content Protection for Recordable Media (CPRM) CPRM is a mechanism that ties a recording to the media on which it is recorded. It is supported by some DVD recorders, but not by many DVD players. Each blank recordable DVD has a unique 64-bit media ID etched in the BCA. When protected content is recorded onto the disc, it can be encrypted with a 56-bit C2 (Cryptomeria) cipher derived from the media ID. During playback, the ID is read from the BCA and used to generate a key to decrypt the contents of the disc. If the contents of the disc are copied to other media, the ID will be absent or wrong and the data will not be decryptable. Recording the current TV program you are watching Before you start Check that the disc has enough available space for the recording. Adjust the recording mode. About the INFO button 1 2 The INFO function allows you to view the current status and progress of playback and recording. Depending on the disc type and status, the displayed screen may be different. Press the OPEN/CLOSE button and place a recordable disc on the disc tray. Press the OPEN/CLOSE button to close the disc tray. Wait until "LOAD" disappears from the front panel display. DVD-RW If an unused DVD-RW disc is inserted, you will be prompted to initialize first. Make your selection using the oe buttons, then press ENTER. (See page 44) Recording Checking the available disc space (Disc Information) When recording on a used disc, make sure that there is enough disc space for recording. With DVD-RWs, you can free up disc space by erasing titles. The disc information display window appears. DVD-RW discs must be formatted before starting to record. Do not use DVD-R authoring discs with this unit. 1 2 3 Press the OPEN/CLOSE button, and place a recordable disc on the disc tray. Press the OPEN/CLOSE button to close the disc tray. Wait until "LOAD" disappears from the front panel display. If an unused DVD-RW disc is inserted, the message "Uninitialized Disc Do you want to initialize this disc?" will appear (See page 44) s s s s Press the INPUT SEL. button to select the input source according to the connection you made. The front panel display changes in the following sequence: s Recording © Channel Number © AV1 © AV2 © DV If you've connected a digital camcorder, press the INPUT SEL. (See page 48) 4 Press the REC MODE button repeatedly, (or press the REC MODE button and then press the . . . button) to select the recording speed(quality). © SP © LP © EP © XP Record Mode XP (01:11) English - 47 Copying from a Camcorder You may control a Digital Camcorder using the IEEE1394 (DV) interface. 5 6 Select the PLAY ( ) icon on the upper part of the screen to playback the camcorder and find the starting position to copy. To start recording, select REC( q ) icon in the top side of the screen using the oe buttons, then press the ENTER button. To stop recording Before you start Check that the disc has enough available space for the recording. See pages 25~26 to see how to connect the camcorder to your DVD recorder. Press the STOP ( ) button to stop or finish recording in progress. · When using DVD-RW/DVD-R discs, the message `Updating the information of disc. [. . . ] If the problem still persists, contact a nearby Samsung service center. Checkpoint 2 Checkpoint 3 Checkpoint 2 Other I forgot my password for parental supervision. Checkpoint 1 Press the ( ) and ( ) buttons on your DVD recorder simultaneously when the power is on. All settings including the password will revert to the factory settings. Do not use this unless absolutely necessary. (Note that this function is possible only when no disc is inserted. ) Is it possible to change a subtitle and an audio signal on a recorded disc? Checkpoint 1 A recorded disc is played with only the subtitle and the audio signal which were selected during recording. Additional Information 92 - English Solutions to Error Message Before contacting a Samsung authorized service center, perform the following simple checks. Error Message You cannot record a copy protected movie. [. . . ]