User manual SAMSUNG DVD-R157

[. . . ] Instruction Manual DVD-R157 www. samsung. com AK68-01315A-02 Getting Started Getting Started Warning TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. [. . . ] ) button again to resume recording. To stop recording Press the STOP ( ) button to stop or finish recording in progress. · When using DVD-RAM/DVD±RW/ DVD±R discs, the message `Updating the information of disc. Please wait for a moment. ' is displayed. You can not change the recording mode and input source during recording. Recording will stop automatically if there is no free space left for recording. Up to 99 titles can be recorded onto a DVD-RAM/-RW/-R disc, and up to 48 titles onto a DVD+RW/+R disc. Recording will stop automatically if a copy protected image is selected. If you are using a Cable Box(no antenna), you cannot watch a different cable TV program from the one you're recording. DVD-RAM/DVD±RW/ DVD+R discs must be formatted before starting to record. Do not use DVD-R authoring discs with this unit. English - 40 Copying from a Camcorder Record Mode XP (01:11) You may control a Digital Camcorder using the IEEE1394 (DV) interface. Before you start Check that the disc has enough available space for the recording. See page 25 to see how to connect the camcorder to your DVD recorder. DV 1. Press the OPEN/CLOSE button, and place a recordable disc on the disc tray. Press the OPEN/CLOSE button to close the disc tray. Wait until "LOAD" disappears from the front panel display. Press the REC MODE button repeatedly to select the recording speed(quality). If the input is set to DV, a playback/record menu that enables Digital camcorder control appears on the top of the screen. Select the PLAY ( ) icon on the upper part of the screen to playback the camcorder and find the starting position to copy. To start recording, select REC( ) icon in the top side of the screen using the buttons, then press the ENTER button. The DV device is connected MOVE SELECT RETURN Recording To stop recording Press the STOP ( ) button to stop or finish recording in progress. · When using DVD-RAM/DVD±RW/ DVD±R discs, the message `Updating the information of disc. Please wait for a moment' is displayed. You can not change the record mode and input source while recording. Recording will stop automatically if there is no free space left for recording. [. . . ] To receive warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG's authorized service center. Transportation of the product to and from the service center is the responsibility of the purchaser. [. . . ]