User manual SAMSUNG DVD-V440

[. . . ] Instruction Manual DVD-V540 DVD-V440 DVD-V340 STANDBY/ON OPEN/CLOSE OK PAL/NTSC AK68-00413B www. samsungvcr. com Remote Control Overview (DVD-V540) STANDBY/ON OPEN/CLOSE (DVD-V440/V340) STANDBY/ON OPEN/CLOSE OK OK Contents Foreword Safety Instructions . 4 DVD-VCR Overviews Front View of the DVD-VCR . 5 6 6 7 Checking a Preset Recording . 21 Adjusting Picture Alignment Manually . [. . . ] · "DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc. Dolby Digital Out 1. Select PCM when using the Analog Audio Outputs. Bitstream : Converts to Dolby Digital Bitstream (5. 1CH). Select Bitstream when using the Digital Audio Output. Be sure to select the correct Digital Output or no audio will be heard. Select PCM when using the Analog Audio Outputs. Bitstream : Converts to MPEG-2 Digital Bitstream (5. 1CH or 7. 1CH). Select Bitstream when using the Digital Audio Output. On : Doesn't output digital signal. Outputs DTS Bitstream via digital output only. Select DTS when connecting to a DTS Decoder. ENG-28 Setting Up the Display Options 1 With the unit in Stop mode, press the MENU button. , buttons, then OK or TV Aspect Depending on the type of television you have, you may want to adjust the screen setting (aspect ratio). 4:3 Letter Box : Select when you want to see the total 16:9 ratio screen DVD supplies, even though you have a TV with a 4:3 ratio screen. Black bars will appear at the top and bottom of the screen. Select this for conventional size TVs when you want to see the central portion of the 16:9 screen. (Extreme left and right side of movie picture will be cut off. ) You can view the full 16:9 picture on your widescreen TV. Setup Setup Display Setup Setup : 2. 4:3 Pan Scan : 3 Select Display Setup using press the OK or button. , buttons, then 4 Use the , buttons to select the desired item. Then press the OK or button. Display Setup TV Aspect Black Level NTSC Disc Output 3. 16:9 Wide : : 4:3 L-Box : NTSC Black Level Adjusts the brightness of the screen. (On/Off) NTSC Disc Output "NTSC" if the screen only has one NTSC-video entrance. If this is not the case, you can choose to leave " PAL60" as is. ENG-29 Setting Up the Parental Control The Parental Control function works in conjunction with DVDs that have been assigned a rating - which helps you control the types of DVDs that your family watches. There are up to 8 rating levels on a disc. 1 With the unit in Stop mode, press the MENU button. 2 Select DVD using , buttons, then OK or button. , buttons, then 3 Select Parental Setup using press the OK or button. Yes Setup Setup Display Setup Setup : . . 4 Use OK or to select Yes if you want to use a password. [. . . ] Carry out the instructions "Tuning Your Television for the DVDVCR" (see page 9). Carry out the instructions "Setting the DVD-VCR output Channel" (see page 15), move the channel number several channels down from the original setting. Replace the aerial plug into the socket marked (aerial symbol) on the rear of the DVD-VCR. Re-tune your TV to the DVD-VCR again by following instructions "Tuning Your Television for the DVD-VCR" (page 9). [. . . ]