User manual SAMSUNG DVD-V6000

[. . . ] User's Manual DVD-V5500 DVD-V6000 DVD-V6500 STANDBY/ON OPEN/CLOSE OK PAL www. samsungvcr. com Safety Instructions Getting Started The following illustrations represent precautions. The lightning bolt is a warning sign alerting you to dangerous voltage inside the product. Refer to service personnel. 10% 40¡C 75% H 5¡C H DO NOT expose the DVD-VCR to extreme temperature conditions (below 5°C and above 40°C) or to extreme humidity conditions (less than 10% and more than 75%). DO NOT expose the DVD-VCR to direct sunlight. DO NOT expose the DVD-VCR to any liquids. DO NOT place any objects on the DVD-VCR or remote control. During a storm and/or lightning, unplug the DVD-VCR from the mains jack and aerial. If the remote control is not used for a long period of time, remove the batteries and store it in a cool, dry place. THIS DEVICE IS NOT FOR USE IN INDUSTRIAL ENVIRONMENTS This product incorporates copyright protection technology that is protected by method claims of certain U. S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. [. . . ] or 1-1 Press theselect PROG, then press the OK or button to button. or button to select Standard, then press the OK or button. Timer Method SETUP DVD VCR PROG FUNC OK RETURN MENU Standard VideoPlus English - 35 Cancelling a Preset Recording You can cancel any programmes that are: · Incorrect · No longer required 2 The list of preset recodings is displayed with the corresponding information. PR Day Start Stop Speed SP -V/P Off -- 01 WE 01 13 :: 25 19 :: 57 -- -- -- -- : -- -- : -: : : : : : : : OK RETURN MENU * DVD-V5500 1 Press the MENU button, then press the . . . or button to select PROG , then press the OK or button. The Timer Method menu is displayed. · It can be displayed simply by pressing the TIMER button on the remote control. 3 Press the . . . or button to select the programme to be cancelled, then press the CLEAR button. Timer Method SETUP PR Day Start Stop Speed -- V/P -- -- -- -- -- : -- -- : -DVD VCR PROG If you want to set the timer program, press the OK key. : : : : : : : : : : VCR Functions FUNC OK RETURN MENU OK RETURN MENU * DVD-V6000/DVD-V6500 MENU button, then press the . . . or 1-1 Press theselect PROG, then press the OK or button to button. or button to select Standard, then press the OK or button. · All the recording information is deleted and the broadcast will not be recorded. · Press the MENU button to exit the menu. Timer Method SETUP DVD VCR PROG FUNC OK RETURN MENU Standard VideoPlus 36 - English Playing Back Playing a Cassette This function allows you to play back any pre-recorded cassette. 1 2 Switch on both the television and your DVD-VCR. Insert the video cassette. If the safety tab on the cassette is intact, press the ll (play/pause) button. Otherwise, the cassette is played automatically. · When a cassette is loaded, the tape position is optimized automatically to reduce disturbance (Digital Auto Tracking). When playing a cassette, if the end of the tape is reached, the cassette is rewound automatically. NTSC tapes can be played back but cannot be recorded with this DVD-VCR. 3 Press the (stop) button to stop the playback. Press the (eject) button to eject the playback. Playing Back Adjusting Picture Alignment Manually · Playing a Cassette . 37 · Adjusting Picture Alignment Manually . 37 · Selecting the Audio Output Mode . 38 · Playing a Cassette in Slow Motion . 38 · Playing a Sequence Frame by Frame . 38 · Playing a Sequence at Variable Speeds . 38 · Searching for a Specific Sequence . 40 This feature allows you to adjust the alignment manually to obtain the best possible picture. When noise bars or streaks appear during playback, adjust alignment manually by pressing the TRK . . . [. . . ] Press the oeoe and buttons simultaneously on the front panel for five seconds. Power off and on the DVD-VCR by pressing STANDBY/ON button. The parental mode is now unlocked as indicated on the display. You can now set your rating level and change your password to a new number. [. . . ]