User manual SAMSUNG DVD-V6600

[. . . ] User's Manual DVD-V6600 PAL/NTSC www. samsung. com Safety Instructions The following illustrations represent precautions. The lightning bolt is a warning sign alerting you to dangerous voltage inside the product. Refer to service personnel. H H DO NOT expose the DVD-VCR to extreme temperature conditions (below 5°C and above 40°C) or to extreme humidity conditions (less than 10% and more than 75%). DO NOT expose the DVD-VCR to direct sunlight. DO NOT expose the DVD-VCR to any liquids. DO NOT place any objects on the DVD-VCR or remote control. During a storm and/or lightning, unplug the DVD-VCR from the mains jack and aerial. If the remote control is not used for a long period of time, remove the batteries and store it in a cool, dry place. THIS DEVICE IS NOT FOR USE IN INDUSTRIAL ENVIRONMENTS This product incorporates copyright protection technology that is protected by method claims of certain U. S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. [. . . ] 2 etc. · This DVD-VCR uses a standard indexing system (VISS). As a result, it will recognize any indexes marked by other VCRs using the same system and vice versa. Playing a Sequence at Variable Speeds You can vary the playback speed using the Shuttle function (up to nine times the normal speed). Example: You wish to analyse a sports person's technique, movement by movement. · No sound is heard when playing a sequence at variable speeds. Go To [0:00:00] Stop Use this feature when you want to search for the 0:00:00 counter position on a cassette. Press the CLEAR button at the point on the tape where you want to set the counter to 0:00:00. The VCR will rewind or fast forward, searching for the 0:00:00 counter position, and then automatically stop at that position. 1 Press the MENU button, then press the 2 Press the 1 Press the : · ll button to start playing the cassette. · SHUTTLE (<<) button to play the cassette backwards. · SHUTTLE (>>) button to play the cassette forwards. or button to select FUNC. or button to select VCR Function, then press the OK or button. The VCR Function menu is displayed with the Go To [0:00:00] selected. VCR Function SETUP DVD VCR PROG FUNC OK RETURN MENU Go To [0:00:00] End Search Intro Scan 2 Each time you press the SHUTTLE button, the speed is changed as shown in the following illustration. REVERSE REVERSE REVERSE SLOW SLOW PLAY PLAY PLAY PLAY PLAY PLAY STILL MOTION MOTION PLAY X3 X5 X9 X9 X5 X3 X1/10 X1/5 · It can be displayed simply by pressing the SEARCH button. 3 Press the OK or button again. 28 - English End Search Use this feature when you want to search for a blank position to record a program on a cassette. The VCR will fast forward, searching for a blank position, and then automatically stop at that position. If the VCR reaches the end of the tape during end search, the tape will be ejected. 4 When an Index mark is found the DVD-VCR will playback the tape for 5 seconds, after which it will continue searching for the next Index mark INTRO SCAN : 1 Press the SEARCH button. Press the button to select End Search. VCR Function SETUP DVD VCR PROG FUNC OK RETURN MENU Go To [0:00:00] End Search Intro Scan 5 If you want to watch the tape from a or particular Index, press the ll button twice. Index Skip Search This feature will enable you to fast forward/rewind to a specific point on a tape: e. g. If you have recorded 3 different programmes on a tape and you have rewound the tape to the beginning, by using this feature you can go directly to the start of programme 2 simply by pressing the SEARCH button. 2 Press the OK or Intro Scan button. 1 Press the SEARCH button. The VCR Function menu is displayed. Press the or button to select Intro Scan. VCR Function SETUP DVD VCR PROG FUNC OK RETURN MENU Go To [0:00:00] End Search Intro Scan 1 Press the SEARCH button. The VCR Function menu is displayed. Press the or button to select Intro Scan. VCR Function SETUP DVD VCR PROG FUNC OK RETURN MENU Go To [0:00:00] End Search Intro Scan 2 Press the OK or 3 Press the or button. button twice more. 2 Press the OK or 3 Press the button. 4 These Index searches can be made forwards (press the button) or backwards (press the button). ( -20 0 +20 ) This will take you directly to the start of the desired programme is located. INDEX SEARCH : -06 or button depending on the direction where your desired programme is located. INTRO SCAN : To cancel an Index search simply press the ll or button. English - 29 Using the Tape Counter The tape counter: · Indicates the elapsed time in the play and record modes (Hours, Minutes and Seconds). · Is reset when a cassette is inserted in the DVD-VCR. · Allows you to find the beginning of a sequence easily. · If the remaining time is to be calculated correctly, you must indicate the type of cassette being used. 1 Insert a cassette in your DVD-VCR. To set the tape counter to zero at the beginning of a sequence: 0:00:00 · Press the INFO button twice to display the counter. · Press the CLEAR button when you want to set the tape counter to zero. 2 When you are ready, · Start Playback or Recording. [. . . ] Carry out the instructions "Tuning Your Television for the DVDVCR" (See page 13). Carry out the instructions "Setting the VCR output Channel" (See page 18), move the channel number several channels down from the original setting. Replace the aerial plug into the socket marked (Aerial symbol) on the rear of the DVD-VCR. Re-tune your TV to the DVD-VCR again by following instructions "Tuning Your Television for the DVD-VCR" (See page 13). [. . . ]