User manual SAMSUNG DVD-V6700

[. . . ] User's Manual DVD-V6700 www. samsung. com/uk Safety Instructions The following illustrations represent precautions. The lightning bolt is a warning sign alerting you to dangerous voltage inside the product. Refer to service personnel. DO NOT expose the DVD-VCR to extreme temperature conditions (below 5°C and above 40°C) or to extreme humidity conditions (less than 10% and more than 75%). DO NOT expose the DVD-VCR to direct sunlight. DO NOT expose the DVD-VCR to any liquids. DO NOT place any objects on the DVD-VCR or remote control. During a storm and/or lightning, unplug the DVD-VCR from the mains jack and aerial. If the remote control is not used for a long period of time, remove the batteries and store it in a cool, dry place. THIS DEVICE IS NOT FOR USE IN INDUSTRIAL ENVIRONMENTS This product incorporates copyright protection technology that is protected by method claims of certain U. S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. [. . . ] The VCR Function menu is displayed with the Go To [0:00:00] selected. VCR Function SETUP DVD VCR PROG FUNC OK RETURN MENU Go To [0:00:00] End Search Intro Scan 2 Each time you press the SHUTTLE button, the speed is changed as shown in the following illustration. REVERSE REVERSE REVERSE SLOW SLOW PLAY PLAY PLAY PLAY PLAY PLAY STILL MOTION MOTION PLAY X3 X5 X9 X9 X5 X3 X1/10 X1/5 · It can be displayed simply by pressing the SEARCH button. 3 Press the OK or button again. 30 - English End Search Use this feature when you want to search for a blank position to record a program on a cassette. The VCR will fast forward, searching for a blank position, and then automatically stop at that position. If the VCR reaches the end of the tape during end search, the tape will be ejected. 4 When an Index mark is found the DVD-VCR will playback the tape for 5 seconds, after which it will continue searching for the next Index mark INTRO SCAN : 1 Press the SEARCH button. Press the button to select End Search. VCR Function SETUP DVD VCR PROG FUNC OK RETURN MENU Go To [0:00:00] End Search Intro Scan 5 If you want to watch the tape from a or particular Index, press the ll button twice. Index Skip Search This feature will enable you to fast forward/rewind to a specific point on a tape: e. g. If you have recorded 3 different programmes on a tape and you have rewound the tape to the beginning, by using this feature you can go directly to the start of programme 2 simply by pressing the SEARCH button. 2 Press the OK or Intro Scan button. 1 Press the SEARCH button. The VCR Function menu is displayed. Press the or button to select Intro Scan. VCR Function SETUP DVD VCR PROG FUNC OK RETURN MENU Go To [0:00:00] End Search Intro Scan 1 Press the SEARCH button. The VCR Function menu is displayed. Press the or button to select Intro Scan. VCR Function SETUP DVD VCR PROG FUNC OK RETURN MENU Go To [0:00:00] End Search Intro Scan 2 Press the OK or 3 Press the or button. button twice more. 2 Press the OK or 3 Press the button. 4 These Index searches can be made forwards (press the button) or backwards (press the button). ( -20 0 +20 ) This will take you directly to the start of the desired programme is located. INDEX SEARCH : -06 or button depending on the direction where your desired programme is located. INTRO SCAN : To cancel an Index search simply press the ll or button. English - 31 Using the Tape Counter The tape counter: · Indicates the elapsed time in the play and record modes (Hours, Minutes and Seconds). · Is reset when a cassette is inserted in the DVD-VCR. · Allows you to find the beginning of a sequence easily. · If the remaining time is to be calculated correctly, you must indicate the type of cassette being used. 1 Insert a cassette in your DVD-VCR. To set the tape counter to zero at the beginning of a sequence: 0:00:00 · Press the INFO button twice to display the counter. · Press the CLEAR button when you want to set the tape counter to zero. 2 When you are ready, · Start Playback or Recording. · To fast-froward or rewind to the sequence at which the counter was set to zero, press the or button. · Some DVD-VCR information, such as the counter, can be displayed on the television screen (Unless you have deactivated the Screen Messages mode; refer to page 23). Press the INFO button: · Once to display the current function, programme number, recording speed, time and counter. · Twice to display the counter only. · Three times to display the time remaining on the cassette. · Four times to clear the display. 32 - English D VD F unctions Setting Up the Language Features If you set disc menu, audio and subtitle language in advance, it will come up automatically every time you watch a movie. Using the Audio Language 1 Press the MENU button in the stop mode. Press the or press the OK or SETUP DVD VCR PROG FUNC OK RETURN MENU Language Setup Audio Setup Display Setup Parental Setup : DivX(R) Registration button to select DVD, then button. DVD Setup Using the Disc Menu Language 1 Press the MENU button in the stop mode. Press the or press the OK or SETUP DVD VCR PROG FUNC Language Setup Audio Setup Display Setup Parental Setup : DivX(R) Registration button to select DVD, then button. DVD Setup 2 Press the OK or button again. Press the or button to select Audio, then press the OK or button. Language Setup Disc Menu : English : English : English OK RETURN MENU Audio Subtitle 2 Press the OK or button again. Press the or button to select Disc Menu, then press the OK or button. Language Setup Disc Menu Audio Subtitle : English : English : English OK RETURN MENU 3 Press the or button to select the required language. Audio Language English Français Audio Deutsch Español Italiano Nederlands Original Others OK RETURN MENU OK RETURN MENU 3 Press the or button to select the required language. Disc Menu Language English Français Disc Menu Deutsch Español Italiano Nederlands Others OK RETURN MENU · Select Original if you want the default soundtrack language to be the original language the disc is recorded in. · Select Others if the language you want is not listed. 4 Press the OK button. · Select Others if the language you want is not listed. English - 33 Using the Subtitle Language Setting Up the Audio Options 1 Press the MENU button in the stop mode. Press the or press the OK or button to select DVD, then button. DVD Setup 1 Press the MENU button in the stop mode. Press the or press the OK or SETUP DVD VCR PROG FUNC button to select DVD, then button. DVD Setup SETUP DVD VCR PROG FUNC Language Setup Audio Setup Display Setup Parental Setup : DivX(R) Registration Language Setup Audio Setup Display Setup Parental Setup : DivX(R) Registration OK RETURN MENU OK RETURN MENU 2 Press the OK or button again. [. . . ] In the event that warranty service is required, you should return the product to the retailer from whom it was purchased. However, Samsung Authorised Dealers and Authorised Service Centres in other EC Countries will comply with the warranty on the terms issued to purchasers in the country concerned. In case of difficulty, details of our Authorised Service Centres are available from: Samsung Electronics U. K. Customer Care Centre PO Box 17243 Edinburgh, EH11 4YB United Kingdom Tel : 0870 SAMSUNG (7267864), Fax : 0870 7221127 (United Kingdom) Tel : 0818 717 100, Fax : +44 (0)870 7221127 (Republic of Ireland) Web : www. samsung. com/uk WARRANTY CONDITIONS 1. [. . . ]