User manual SAMSUNG DVD-V7600K

[. . . ] User's Manual DVD-V7500K STANDBY/ON OPEN/CLOSE PAL/NTSC www. samsung. com Safety Instructions Getting Started The following illustrations represent precautions. The lightning bolt is a warning sign alerting you to dangerous voltage inside the product. Refer to service personnel. DO NOT expose the DVD-VCR to extreme temperature conditions (below 5°C and above 40°C) or to extreme humidity conditions (less than 10% and more than 75%). DO NOT expose the DVD-VCR to direct sunlight. DO NOT expose the DVD-VCR to any liquids. DO NOT place any objects on the DVD-VCR or remote control. During a storm and/or lightning, unplug the DVD-VCR from the mains jack and aerial. If the remote control is not used for a long period of time, remove the batteries and store it in a cool, dry place. THIS DEVICE IS NOT FOR USE IN INDUSTRIAL ENVIRONMENTS This product incorporates copyright protection technology that is protected by method claims of certain U. S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. [. . . ] 41 36 - English Selecting the Audio Output Mode You can select the mode in which the sound is reproduced on the loudspeakers and AV outputs. Press the AUDIO button on the remote control until the required option is displayed. Option L R MIX MONO LR Description Used to listen to the sound on the left Hi-Fi channel. Used to listen to the sound on the right Hi-Fi channel. Used to listen to the mixed sound of the Hi-Fi and normal channels. Used to listen to the sound on the normal mono channel. Used to listen to Hi-Fi stereo sound on the left and right channels · When playing back tapes recorded in Hi-Fi, the sound switches to Hi-Fi after five seconds of Mono. Playing a Sequence Frame by Frame You can · Stop the cassette at a given frame (image) · Advance one frame at a time No sound is heard when playing back frame by frame. 1 Press the : · ll button to start playing the cassette. · ll button again to make still mode. · F. ADV button to advance frame by frame. · ll button to return to normal playback. · Vertical stability: When playing back frame by frame, interference may be seen on the screen. Press the TRK ( or ) button to minimize this effect. To select the sound mode, simply press the AUDIO button on the remote control until the required option is displayed. L R MIX MONO L R Playing a Cassette in Slow Motion You can play a cassette in slow motion. · No sound is heard when playing back a cassette in slow motion. Playing a Sequence at Variable Speeds You can vary the playback speed using the Shuttle function (up to nine times the normal speed). Example: You wish to analyse a sportsperson's technique, movement by movement. · No sound is heard when playing a sequence at variable speeds. Playing Back 1 Press the : · ll button to start playing the cassette. · ll button again to make still mode. · oeoe or button as many times as required to decrease or increase the speed respectively. · ll button twice to return to the normal speed. · The slow motion feature does not support running video backwards. When playing back in slow motion, picture interference may occur. Press the TRK ( or ) button to minimize this effect. · When you have been using the Slow Motion function for more than about two minutes, the DVD-VCR will automatically play to protect the: - Cassette - Video heads 1 2 Press the : · ll button to start playing the cassette. [. . . ] Replace the aerial plug into the socket marked (aerial symbol) on the rear of the DVD-VCR. Re-tune your TV to the DVD-VCR again by following instructions "Tuning Your Television for the DVD-VCR" (see page 15). If the problem still exists repeat steps 1 to 5 moving several more channels away from the original setting. If when tuning in your TV to the DVD-VCR TV does not find the Screen or the pattern when found suffers from interference, it may be due to the DVD-VCR output channel clashing with the normal TV transmissions in your area. To prevent this you will need to change the DVD-VCR output channel in the following way Reference English - 67 Troubleshooting Guide (DVD) Problem Solution Page Disc does not play. N Ensure that the disc is installed with the label side facing up. [. . . ]