User manual SAMSUNG DVD-V8500K

[. . . ] 32 11 - Timer Recording How to Set a Timer Recording . 33 Appendix - Help Technical Specifications . 34 RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Note to CATV system installer: This reminder is provided to call CATV system installer's attention to Article 820-40 of the National Electrical Code (Section 54 of Canadian Electrical Code, Part I) that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical. [. . . ] · Pan-Scan - The familiar way of watching DVD and VHS movies, this method selectively crops (by panning and scanning to keep the most important part of the picture visible) wide screen movies to fit a standard 4:3 television screen. Display Setup ENG-18 ENG-19 Black Level Alt Video Out Parental The Black Level feature adjusts the reference level of black in the video signal to one of two choices: · Off - Standard NTSC black level. Yields consistent contrast through all sources. · On - Enhanced black level, for increased contrast during DVD playback. 1 Open "MENU" Press the MENU button while the DVD is in Stop mode. 2 Select "DVD" Use the UP/DOWN buttons to highlight "DVD " then press the ENTER button. 3 Select "Display" Highlight "Display", then press the ENTER button. 1 Open "MENU" Press the MENU button while the DVD is in Stop mode. 2 Select "DVD" Use the UP/DOWN buttons to highlight "DVD, " then press the ENTER button. 3 Select "Display" Highlight "Display", then press the ENTER button. Rating Control is a password protected system that allows you to block playback of DVDs based on their content. The system uses an eight level rating system. · If you try to play a DVD that exceeds the selected rating, an error message will appear. 1 Open "MENU" Press the MENU button while the DVD is in Stop mode. · The picture will pause and the audio will mute. · To resume playback, press the ll(PLAY/PAUSE) button. · If the player is left in Pause mode for 5 minutes, it will stop automatically. 2 Frame Advance (Step) While in PAUSE mode, press the F. ADV/SKIP button on the remote control to advance one frame at a time. · Audio is muted during Frame Advance mode. · Press ll(PLAY/PAUSE) to resume normal playback. NOTE: Frame Advance operates only in the forward direction. 3 Skip Forward/Back While a CD or DVD disc is in Play mode, press the l SKIP FORWARD/BACK ( / l) buttons on the remote control or front panel to jump forward and backward through disc chapters/tracks. · Skip Forward will jump to the next chapter/track. · Skip Back will jump to the beginning of the current chapter/track. · Press Skip Back again to jump to the beginning of the previous chapter/track. [. . . ] And DVD-VCR will be Automatically turned off when the OTR finished. Record length 0:30 07 0:30 1:00 1:30 6 Auto Speed Select If the length of the videotape is not long enough for a timer recording in the SP mode, set the recording tape speed to "AUTO". If the length is not long enough, the tape speed will automatically change from SP mode to SLP mode. 7 Save "Timer Recording" Weekly [Sun's~Sat's]: Use this to record TV programs on the same channel at the same time every week. Daily [MO - FR] : Use this to record TV programs on the same channel at the same time every day Monday through Friday. No 1 2 3 4 5 6 7 4 Select "Go to [0: 00: 00]" Highlight "Go to [0: 00: 00]", then press the ENTER button. [. . . ]