User manual SAMSUNG DVD-VR330S

[. . . ] Instruction Manual DVD-VR330, VR330S www. samsung. com English AK68-00995J-00 Warning Getting Started TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates "dangerous voltage" inside the product that presents a risk of electric shock or personal injury. This symbol indicates important instructions accompanying the product. Do not install this equipment in a confined space such as a bookcase or similar unit. WARNING : To prevent damage which may result in fire or electric shock hazard, do not expose this appliance to rain or moisture. [. . . ] The videotape will begin to play automatically if the Record Safety Tab is removed and Auto Play is turned on. Record Safety Tab JPEG01 Playback MOVE PHOTO ENTER RETURN 3 Press the (STOP) button on the remote control or on the front panel of the unit. : Returns to the Album screen. Before the slide show can begin, the picture interval (Slide show speed) must be set. : Each time the ENTER button is pressed, the picture rotates 90 degrees clockwise. : Each time the ENTER button is pressed, the picture is enlarged up to 4X(four times the normal size). normal size 2X 4X 2X · Press the ANYKEY button to display menu bar. · Press the RETURN button to clear the menu bar. Tracking The Tracking adjustment removes the white lines that sometimes appear during playback because of slight differences in recording decks. The CH/TRK ( / ) button will automatically align the recorded tracks with the playback heads to solve this problem. You may also set tracking manually. 1 Adjust Tracking Manually During playback, press the CH/TRK ( / ) buttons to remove white lines from the picture. 56 - English Special VCR Playback Features While a videotape is playing, you can enjoy a variety of special playback features, including Still, Frame Advance, Skip, Slow motion, and more. Variable Search System Each time you record a cassette on this DVD Recorder & VCR, an "index" is automatically marked on the tape when recording is started. The Search function allows you to fast-forward or rewind to a specific index and start playback from that point. Depending on the direction selected, the indexes are numbered as follows · This DVD Recorder & VCR uses a standard indexing system (VISS). As a result, it will recognize any indexes marked by other VCRs using the same system and vice versa. Pause In Play mode, press II(PLAY/PAUSE)button to still a single frame. Frame Advance In Pause mode, press F. ADV/SKIP button to advance to the next frame. Go To Zero Use this feature when you want to search for the 0:00:00 counter position on a cassette. Fps/Review In Play mode, press Forward ()button or Rewind (oeoe)button to Fps/review at two speeds: · Picture Search - Press and release repeatedly to advance the tape forward or backward at 2, 3, 5, 7 times normal speed. · Jet Search - Press and hold to advance the tape forward or backward at 7 times normal speed. 1 2 Press the CANCEL button at the point on the tape where you want to set the counter to 0:00:00. While a cassette is stopped, press the ANYKEY button. VCR Go To Zero End Search Forward Intro Scan Reverse Intro Scan MOVE SELECT Playback Skip In Play mode, press F. ADV/SKIP button to cue ahead exactly 30 seconds. Press F. ADV/SKIP button repeatedly up to 4 times to cue ahead 2 minutes. Slow motion In Pause mode, press button for slow motion. Press the button repeatedly to vary slow motion speed from 1/5 to 1/30 of normal playback. Press the PLAY button twice to resume normal viewing. 3 S-VHS Playback The DVD Recorder & VCR allows you to playback high quality S-VHS tapes. Press the . . . buttons to select Go To Zero, then press the ENTER button. The VCR will rewind or fast forward, searching for the 0:00:00 counter position, and then automatically stop at that position. Go To Zero 00:00:49 1 Insert an S-VHS tape into the VCR deck. 2 Press II (PLAY/PAUSE) button on the remote control or on the front panel to play a S-VHS tape. English - 57 End Search Use this feature when you want to search for a blank position to record a program on a cassette. 2 Press the . . . buttons to select Forward Intro Scan or Reverse Intro Scan, then press the ENTER button. When an Index mark is found, the DVD Recorder & VCR will playback the tape for 5 seconds, after which it will continue searching for the next Index mark. 1 While a cassette is stopped, press the ANYKEY button. VCR Go To Zero End Search Forward Intro Scan Reverse Intro Scan MOVE SELECT Scan and Play 00:01:49 2 Press the . . . buttons to select End Search, then press the ENTER button. The VCR will fast forward, searching for a blank position, and then automatically stop at that position. [. . . ] (SAMSUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of: One (1) Year Parts / Ninety (90) days Labor (90 days Parts and Labor for Commercial Use) This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States. To receive warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG's authorized service center. [. . . ]