User manual SAMSUNG DW-28A20SD

[. . . ] DIGITAL TELEVISION Owner's Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. ON-SCREEN MENUS TELETEXT DIGITAL TERRESTRIAL RECEIVER Contents CONNECTING AND PREPARING YOUR TELEVISION View of Your Television . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Becoming Familiar with the Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inserting the Batteries in the Remote Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connecting to an Aerial or Cable Television Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Result: Press the or button to select System. The options available in the System group are Result: displayed. Press the or button to select Signal Information, and press the ENTER button. The technical information for signal status is displayed. Result: 3 4 If the signal is poor, the "No signal" message is displayed. English - 26 Setting the Time Zone Select your place of residence to set the exact time. 1 2 Press the D. MENU button. Result: Press the or button to select System. The options available in the System group are Result: displayed. Press the or button to select Time Zone Setting, and press the ENTER button. The Australian Time Zone List is displayed. Result: Select your place of residence in the Time Zone List, then press the ENTER button. 3 4 5 You can check the current time in the Programme Information or in the Guide Menu. Time data is automatically adjusted according to the selected Time Zone. English - 27 Storing Channels Automatically TV Channel Auto store Manual store Add/Delete Sort Name Fine tune Move Enter Return Available in Analog TV mode. You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch. 1 Press the MENU button. Result: The main menu is displayed. 2 TV Country Search Auto store : Australia : -/+ Press the or button to select Channel. Result: The options available in the Channel group are displayed. 3 Press the ENTER button. Result: The Auto store is selected. 4 Move Adjust Return Press the ENTER button again. Result: The options available in the Auto store group are displayed with Country is selected. TV Country Search Auto store : Australia : -/+ 5 Select your country by pressing the oe or button. The countries are displayed in the following order: Australia - Belgie Deutschland - España - France - Italia - Nederland - Schweiz - Sverige - UK - East europe - Others. Press the oe or button to start the search. Result: The horizontal bar is displayed, and then channels are stored in an order which reflects their positions in the frequency range. Finally, the search will end automatically. 6 7 Move Search Return P 1 S01 ----106 MHz 8 To stop the search before it has finished, press the MENU button. When searching and storing are complete, the Sort menu is displayed. To sort the stored channels into the desired numerical order, go to Step 6 of the "Sorting the Stored Channels" procedure on page 29. Return TV From To Store Sort : P 1 ----: P-- ----:? To exit from the channel store function without sorting the channels, press the MENU button repeatedly until the menus disappear. 9 When the channels have been stored, you can: Sort them in the order required (refer to page 29) Clear a channel (refer to page 32) Assign a name to the stored channels (refer to page 33) Fine tune channel reception if necessary (refer to page 34) Activate the Digital Noise Reduction feature (refer to page 37) Move Adjust Return English - 28 Sorting the Stored Channels This operation allows you to change the programme numbers of stored channels. [. . . ] Sub-pages can be scrolled by using the Red or Green button. Storing Teletext Pages You can store up to four teletext pages to display them later at leisure. 1 Select the LIST mode using the Result: button. 2 3 4 5 Four 3-digit numbers are displayed in different colours. The button is used to switch between the LIST and FLOF modes. Press the coloured button corresponding to the page that will be replaced. Enter the new page number using the numeric buttons. Repeat steps 2 and 3 for each page to be stored, using a different coloured button each time. Press the (store) button until the corresponding blocks blink. English - 48 Connecting to the AV-1 or 2 Input/Outputs AV-1 or 2 is used for equipment with an RGB output, such as video game devices and video disc players or a VCR. VCR DVD Rear of the TV Decoder / Video game device Video disc player This end can be fitted with: Satellite receiver Three RCA connectors (Video + Audio-L and R) If you have a second VCR and wish to copy cassettes tape, connect the source VCR to "AV-1" and the target VCR to "AV-2" so that you can redirect the signal from "AV-1" to "AV-2". [. . . ]