User manual SAMSUNG EO-SG900

[. . . ] Unapproved chargers or cables can cause the battery to explode or damage the device. €¢ The Power button turns red while the speaker is being charged. The Power button turns green when charging is complete. Indb 3 2014-12-02 오전 11:03:10 Charging time (1, 600 mAh) Charging time • Approx. [. . . ] From the search results, select the Bluetooth speaker. €¢ When pairing is complete, the speaker appears as “Connected” in the devices list. Indb 6 2014-12-02 오전 11:03:11 Connecting via Bluetooth using the NFC feature 1 2 • The other device's screen must be unlocked to enable the devices to connect. €¢ End the Bluetooth connection between the Bluetooth speaker and any other device first. The NFC feature is not available while another device is connected to the speaker. english Turn on the Bluetooth speaker. Activate the NFC feature on the other device and bring the other device’s NFC antenna close to the NFC antenna on the speaker. Ending the Bluetooth connection You can end the Bluetooth connection by turning off the Bluetooth speaker or by disabling the Bluetooth feature on the connected device. Alternatively, place the devices' NFC antennas near to each other to end the Bluetooth connection. Indb 7 2014-12-02 오전 11:03:11 Connecting using an audio cable You can use an audio cable to connect other media devices, such as a smartphone, to the Bluetooth speaker. Audio playback is not available from Bluetooth and audio cable connections at the same time. If the speaker is playing audio via Bluetooth, end the Bluetooth connection or stop playback before connecting a device that uses an audio cable. If the Bluetooth speaker is connected to other devices using an audio cable and Bluetooth simultaneously, the speaker plays audio from the device connected via Bluetooth. When playback from the Bluetoothconnected device stops, the speaker plays audio from the device connected using an audio cable. Indb 8 2014-12-02 오전 11:03:11 Using the Bluetooth speaker When the Bluetooth speaker is connected to a Bluetooth or NFC-enabled device, you can play audio on the speaker or use it as a speaker phone. While a device is connected to the speaker, you can turn on the voice recognition feature of the connected device by pressing and holding the Play/Stop button. The functions that are available when you press and hold the Play/Stop button may differ depending on the connected device. Playing audio English Play audio from the connected device. €¢ Press the Volume (+) button or the Volume (-) button to adjust the volume. €¢ A notification will sound when the speaker volume reaches its maximum value. If the sound is not loud enough when the speaker volume is set to maximum, adjust the volume of the connected device. • Press the Play/Stop button to pause or resume playback. [. . . ] €¢ Leaving batteries unused over time may reduce their lifespan and performance. It may also cause the batteries to malfunction or explode, or cause a fire. Indb 12 2014-12-02 오전 11:03:12 • Follow all instructions in this manual to ensure the longest lifespan of your device and battery. Damages or poor performance caused by failure to follow warnings and instructions can void your manufacturer’s warranty. [. . . ]