User manual SAMSUNG FINO 120

[. . . ] ENGLISH NOTE This camera will not function without a battery. The lens cap automatically opens when the Power button is turned on. Do not open the lens cap with your fingers. The shutter does not operate in the following circumstances: When the camera has no battery or when the battery is almost drained. When the Power is turned off. (When the lens cap is closed. ) When the zoom button is operating or when the film is winding or rewinding. [. . . ] Hold the camera steadily and gently press the shutter button completely down. The Focus Lock can be released at any time by lifting your finger from the shutter button. !ATTENTION The Autofocus system of this camera may not function in circumstances below : The subject blends into the background. The subject does not reflect enough light back into the autofocus receiver(e. g. very dark objects). The subject is very narrow, either horizontally or vertically(e. g. a lampost). There is more than one subject, one near the camera and one some distance away. Shining or glossy surfaces such as a car body or the surface of water. In these circumstances, using the Focus Lock feature may help to solve the problem. 17 TAKING PHOTOS REWINDING THE FILM 1. Automatic rewinding After taking all the pictures on a roll of film, the camera will automatically rewind the film. The motor stops when the rewinding is completed. When the rewinding is completed, the icon ( ) will blink. After 5 seconds the icon will no longer be displayed. You may remove the film at this point. (Refer to page 16 for information of buzzer operation) 2. Mid-roll rewinding Rewind button To rewind the film in the middle of a roll, press the Mid-roll rewind button. The film will be completely rewound, ready for processing. You will not be able to reload the film. NOTE If you press the Power button during film rewinding, the rewinding is interrupted until the Power button is released. Do not allow the subject to move until the main flash has fired. Shooting beyond the scope of the flash range will induce the activation of the buzzer and the zoom lens. 22 FILL-IN FLASH Select this mode by pressing the FLASH button 1 times. When the main subject is in shadow and the surrounding light conditions are too strong for the auto-flash to engage, the fill-in flash allows you to expose the subject correctly. NOTE When using this mode, the flash fires regardless of the brightness of the subject and background. Shooting beyond the scope of the flash range will induce the activation of the buzzer and the zoom lens. FLASH OFF Select this mode by pressing the FLASH button twice. Use this mode when you want to take pictures without flash. NOTE When using the Flash Off function, you may need to use a tripod to avoid camera shake. 23 AUTO AUTO FLASH Select the Auto Mode by pressing the FLASH button 3 times. [. . . ] Check point Remedy Was the lens or other sensors obstructed by your Be careful not to block the lens or the exposure sensor. Did you compose a subject correctly referring to the picture Read the "Viewfinder and Indicators" area frame?Page 14 8 32 SPECIFICATIONS TYPE Format Speed FILM Loading Winding Rewinding LENS SHUTTER 35mm fully automatic lens shutter camera. 35mm DX-coded film, 24x36mm Automatic setting with DX-coded film, ISO 50~3200 Automatic advance to the first frame when the back cover is closed. [. . . ]