User manual SAMSUNG G19P PLUS

[. . . ] SyncMaster G19PPlus SyncMaster G19PPlus Install drivers Install programs Model SyncMaster G19PPlus Notational Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment. Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug from the outlet Do not touch Ground to prevent an electric shock Power When not used for an extended period of time, set your computer to DPM. If using a screen saver, set it to active screen mode. The images here are for reference only, and are not applicable in all cases (or countries). Do not use a damaged or loose plug. This may cause electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands. [. . . ] You have finished setting up your monitor. Execute X-Window after setting other requested hardware. 7. Natural Color Natural Color One of the recent problems in using a computer is that the color of the images printed out by a printer or other images scanned by a scanner or a digital camera are not the same as those shown on the monitor. The Natural Color S/W is the very solution for this problem. It is a color administration system developed by Samsung Electronics in association with Korea Electronics & Telecommunications Research Institute (ETRI). This is only available for Samsung monitors and ensures that the color of the images on the monitor are the same as the printed or scanned images. For more information, refer to Help (F1) in the software program. Installing the Natural Color Software Insert the CD included with the Samsung monitor into the CD-ROM Drive. The initial Natural Color screen will appear. Click on Natural Color in the startup window to install the Natural Color software. To install the program manually, insert the CD included with the Samsung monitor into the CDROM Drive, click the Windows [Start] button, select [Run. . . ]. Enter D:\color\NCProSetup. exe and then press the <Enter> key. (If the drive where the CD is inserted is not D:\, enter the applicable drive. ) Uninstalling the Natural Color Software Program Select "Settings/Control Panel" from the "Start" menu and then double-click "Add/Delete a program. " Select Natural Color from the list and then click the "Add/Delete" button. Model SyncMaster G19PPlus 1. [MENU/ ] Use this button to open the on-screen menu and exit from the menu screen or close screen adjustment menu. [ ] This button allows you to adjust items in the menu. 3. [ ] Press this button to activate a highlighted menu item. [AUTO] Press to self-adjust to the incoming PC signal. The values of fine, coarse and position are adjusted automatically. AUTO Menu Description When the 'AUTO' button is pressed, the Auto Adjustment screen appears as shown in the animated screen on the center. Auto adjustment allows the monitor to self-adjust to the incoming video signal. The values of fine, coarse and position are adjusted automatically. (Available in analog mode only) AUTO To make the automatic adjustment function sharper, execute the 'AUTO' function while the AUTO PATTERN is on. - If auto adjustment does not work properly, press AUTO button again to adjust picture with more accuracy. [. . . ] During normal operation of a LCD panel, pixel image retention doesn't occur. However, if the same image is displayed for a long time, a slight difference in electric charge accumulates between the two electrodes which encase the liquid crystal. This may cause the liquid crystal to build up in a certain areas of the display. Thus, the previous image is retained when switching to a new video image. [. . . ]