User manual SAMSUNG GAINABLE MSP FJM

[. . . ] Make sure that these installations are carried out by qualified personnel to avoid electric shock or fire. When using a wireless remote control, the distance should not be more than 7 meters from the air conditioner. (If applicable) Never spill any kind of liquid into the unit. [. . . ] To use the wireless remote controller, refer to an appropriate manual. Operating mode Temperature setting Mode selection button Temperature adjustment buttons Filter Reset button Fan speed Air flow direction On Timer setting Off Timer setting Battery discharge indicator Fan speed adjustment button Swing button (Not operated) On Timer button Off Timer button On/Off & Timer Set/Cancel button Note N After cleaning the air filter, press the button. N Duct type air conditioner does not have function of adjusting air flow direction. Therefore, the function is not operated even if you press the button. E-10 The Receiver & Display Unit ENGLISH E-11 The Receiver & Display unit is an optional accessory and it is installed on the wall. To use the receiver & display unit, refer to an appropriate manual. Concealed Type Filter sign indicator Fan indicator Timer indicator Remote control sensor On/Off indicator(Blue) & Removing frost indicator(Red) Standard Type Removing frost indicator Filter sign indicator Remote control sensor On/Off indicator Fan indicator On/Off button Timer indicator Wired Remote Controller The wired remote controller is installed on the wall. 7-day schedule time setup Schedule clock Operating mode Fan speed Mode selection Indoor temperature Check button Filter reset button Time/schedule reset button Note button after cleaning the air filter. The remote controller will display the filter sign to alert the user to button is clean the filter and turn off the display when the pressed. Restricted will be displayed if the button is pressed for duct type indoor units. Restricted will be displayed if the indoor unit does not support the function of the pressed button. Press the E-12 Centralized Controller ENGLISH E-13 The centralized controller is an optional accessory and it is installed on the wall. To use the centralized controller, refer to an appropriate manual. Front View Operating lamp All On button All Off button On/Off indicators On/Off buttons Index Note N The operating lamp comes on even when only one air conditioner connected to the centralized controller is operating. Side View Operating Mode Switch COOL AUTO HEAT Note N Choose the appropriate operating mode with the Operating Mode Switch that enables the user to choose between the Cool/Auto/Heat mode. Function Controller The function controller is an optional accessory and it is installed on the wall. The function controller is an additional controller which is used with the centralized controller. To use the function controller, refer to an appropriate manual. Operating mode Removing frost indicator Centralized controller indicator Communication error indicator Room number display Temperature setting Fan speed Air flow direction Test indicator Temperature adjustment buttons Indoor unit selection button Filter Sign indicator On/Off & Timer Set/Cancel button On/Off indicator Fan speed adjustment button Swing button Filter Reset button Test button Mode selection button Note N button is for your installation specialist. N After cleaning the air filter, press the button. Then the wired remote controller will display the FILTER SIGN indicator when the time to clean the air filter. E-14 Operating Recommendations ENGLISH Here are a few recommendations that you should follow when operating your air conditioner. Topic Heating performances Recommendation The heat pump function of the air conditioner absorbs heat from outside air and brings it indoors. As the temperature of the outside air drops, the heating performance of air conditioner will decrease. [. . . ] N Dust may be blocking the air filter guard; refer to page 13 for cleaning instructions. N Check that there is no obstacle in front of the outdoor unit. [. . . ]