User manual SAMSUNG HC-P4252W

[. . . ] HC-P4252W HC-P4752W HC-P5252W PROJECTION TELEVISION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-800-SAMSUNG (1-800-726-7864) Samsung Electronics America Service Division 400 Valley Road, Suite 201 Mount Arlington, NJ 07856 www. samsungusa. com Samsung Electronics Canada Inc. Samsung Customer Care 7037 Financial Drive Mississauga, Ontario L5N 6R3 www. samsung. ca . . . . . . . . . . . . . Owner's Instructions This device is a Class B digital apparatus. BP68-00289A-02 Important Warranty Information Regarding Television Format Viewing Standard screen format televisions (4:3, the aspect ratio of the screen width to height) are primarily designed to view standard format full-motion video. The images displayed on them should primarily be in the standard 4:3 ratio format and constantly moving. [. . . ] Press the button to switch to the next field, which will be selected. Select a second letter or digit pressing . . . Repeat the process to select the last two digits. When you have finished, press the ENTER button. Press the EXIT button to exit. TV . . . More Name Scan Channel oe If you add or delete the TV channel, the labeled channels list will also be added or deleted. Move Enter Return TV Channel Air Air Air Air Air 4 6 7 8 9 Name Name ---------A ---- Move Adjust Return 31 O P E R AT I O N Picture Control You can use the on-screen menus to change the "Contrast", "Brightness", "Sharpness", "Color" and "Tint" according to personal preference. (Alternatively, you can use one of the automatic settings. See next page. ) Customizing the Picture 1 Press the MENU button. or button to select "Picture", then press the ENTER button. TV Mode Custom Color Tone Size Digital NR PIP Picture : Dynamic : Normal : 16:9 : On Move Enter Return 2 Press the . . . or button to select "Custom", then press the ENTER button. TV Contrast Brightness Sharpness Color Tint 50 Custom 100 45 75 55 50 Move Enter Return 3 Press the . . . or button to select a particular item, then press the ENTER button. Press the oe or button to increase or decrease the value of a particular item. Press the EXIT button to exit. Contrast 100 32 O P E R AT I O N Using Automatic Picture Settings Your TV has automatic picture settings ("Dynamic", "Standard" and "Movie") that are preset at the factory. You can activate either "Dynamic", "Standard" or "Movie" by pressing the P. MODE button (or by making a selection from the menu). Or, you can select "Custom" which automatically recalls your personalized picture settings. 1 Press the MENU button. or button to select "Picture", then press the ENTER button. TV Mode Custom Color Tone Size Digital NR PIP Picture : Dynamic : Normal : 16:9 : On Move Enter Return 2 Press the ENTER button to select "Mode". or button to select a particular item, then press the ENTER button. TV Mode Custom Color Tone Size Digital NR PIP Picture Dynamic : Dynamic Standard Movie : Normal Custom : 16:9 : On Move Enter Return Press the EXIT button to exit. Alternate method: Press the P. MODE button on the remote control repeatedly to select one of the standard picture settings. Dynamic · Choose Dynamic for viewing the TV during the day or when there is a bright light in the room. · Choose Standard for the standard factory settings. · Choose Movie when viewing a movie. · Choose Custom if you want to adjust the settings according to personal preference (see previous page). 33 O P E R AT I O N Sound Control Adjusting the Volume Press the VOL + or VOL - buttons to increase or decrease the volume. Using the MUTE Button At any time, you can temporarily cut off the sound by using the MUTE button. 1 Press the MUTE button on the remote control. The message "Mute" is displayed and the sound cuts off. 2 To turn mute off press the MUTE button again or, press either the VOL- or VOL+ button. Mute Customizing the Sound The sound settings can be adjusted to suit your personal preference. (Alternatively, you can use one of the automatic settings. [. . . ] In addition to controlling the TV the , universal remote control can also operate a VCR, Cable box, DVD and Set-Top Box made by Samsung (even if your VCR, Cable box and DVD are made by manufacturers other than Samsung). · The remote control might not be compatible with all VCRs, DVD players and Cable boxes. Setting Up Your Remote Control to Operate Your VCR (Cable box or DVD player) 1 Turn off your VCR (Cable box or DVD player). 2 Press the MODE button to switch the remote control to the VCR (CABLE or DVD) mode. oe The remote control has five modes: TV, STB, VCR, CABLE and DVD. 3 On your Samsung remote control, press the SET button. 4 Enter 3 digits of the VCR (Cable box or DVD player) code listed on next page for your brand of VCR (Cable box or DVD player). oe Make sure you enter 3 digits of the code, even if the first digit is a "0". (If more than one code listed, try the first one. ) 5 Press the POWER button on the remote control. Your VCR (Cable box or DVD player) should turn on. [. . . ]