User manual SAMSUNG HC-P4752W

[. . . ] BP68-00289A-00Eng 3/30/04 9:28 AM Page 1 HC-P4252W HC-P4752W HC-P5252W PROJECTION TELEVISION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Owner's Instructions This device is a Class B digital apparatus. BP68-00289A-00Eng 3/30/04 9:28 AM Page 2 Important Warranty Information Regarding Television Format Viewing Standard screen format televisions (4:3, the aspect ratio of the screen width to height) are primarily designed to view standard format full-motion video. The images displayed on them should primarily be in the standard 4:3 ratio format and constantly moving. Displaying stationary graphics and images on screen, such as the dark top and bottom letterbox bars (wide screen pictures), should be limited to no more than 15% of the total television viewing per week. [. . . ] When the INFO button is pressed, the channel label will appear next to the channel number. 1 Press the CH labeled. or CH button to tune to the channel that will be 2 Press the MENU button. or button to select "Channel", then press the ENTER button. TV Channel Antenna : Ant. 1 Air/CATV : Air Auto Program Favorite Channels Fine Tune Add/Delete More Move Enter Return 3 Press the . . . or button to select "Name", then press the ENTER button. or button to select the channel to be assigned to a new name, then press the ENTER button. or button to select a letter, a number or a blank. (Results in this sequence: A. . . Z, -, 0. . . 9, blank, ). Press the button to switch to the next field, which will be selected. Select a second letter or digit pressing . . . Repeat the process to select the last two digits. When you have finished, press the ENTER button. Press the EXIT button to exit. TV . . . More Name Scan Channel oe If you add or delete the TV channel, the labeled channels list will also be added or deleted. Move Enter Return TV Channel Air Air Air Air Air 4 6 7 8 9 Name Name ---------A ---- Move Adjust Return 31 BP68-00289A-00Eng 3/30/04 9:28 AM Page 32 O P E R AT I O N Picture Control You can use the on-screen menus to change the "Contrast", "Brightness", "Sharpness", "Color" and "Tint" according to personal preference. (Alternatively, you can use one of the automatic settings. See next page. ) Customizing the Picture 1 Press the MENU button. or button to select "Picture", then press the ENTER button. TV Mode Custom Color Tone Size Digital NR PIP Picture : Dynamic : Normal : 16:9 : On Move Enter Return 2 Press the . . . or button to select "Custom", then press the ENTER button. TV Contrast Brightness Sharpness Color Tint 50 Custom 100 45 75 55 50 Move Enter Return 3 Press the . . . or button to select a particular item, then press the ENTER button. Press the oe or button to increase or decrease the value of a particular item. Press the EXIT button to exit. Contrast 100 32 BP68-00289A-00Eng 3/30/04 9:28 AM Page 33 O P E R AT I O N Using Automatic Picture Settings Your TV has automatic picture settings ("Dynamic", "Standard" and "Movie") that are preset at the factory. You can activate either "Dynamic", "Standard" or "Movie" by pressing the P. MODE button (or by making a selection from the menu). Or, you can select "Custom" which automatically recalls your personalized picture settings. 1 Press the MENU button. [. . . ] Setting Up Your Remote Control to Operate Your VCR (Cable box or DVD player) 1 Turn off your VCR (Cable box or DVD player). 2 Press the MODE button to switch the remote control to the VCR (CABLE or DVD) mode. oe The remote control has five modes: TV, STB, VCR, CABLE and DVD. 3 On your Samsung remote control, press the SET button. 4 Enter 3 digits of the VCR (Cable box or DVD player) code listed on next page for your brand of VCR (Cable box or DVD player). oe Make sure you enter 3 digits of the code, even if the first digit is a "0". (If more than one code listed, try the first one. ) 5 Press the POWER button on the remote control. Your VCR (Cable box or DVD player) should turn on. If your VCR (Cable box or DVD player) turns on, your remote control is now set correctly. oe If your VCR (Cable box or DVD player) does not turn on, repeat steps 2, 3, and 4, but try one of the other codes listed for the brand of your particular VCR (Cable box or DVD player). 6 Once your remote control is set up, press the MODE button any time you want to use the remote to operate your VCR (Cable box or DVD player). · When your remote is in the TV mode, the VCR (or DVD player) control buttons (REW, STOP, PLAY/PAUSE and FF) will still operate your VCR (or DVD player). [. . . ]