User manual SAMSUNG HC-S4755W

[. . . ] HC-S4355W HC-S4755W HC-S5245W PROJECTION TELEVISION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Owner's Instructions Register your product at www. samsung. com/global/register Important Warranty Information Regarding Television Format Viewing Standard screen format televisions (4:3, the aspect ratio of the screen width to height) are primarily designed to view standard format full-motion video. The images displayed on them should primarily be in the standard 4:3 ratio format and constantly moving. Displaying stationary graphics and images on screen, such as the dark top and bottom letterbox bars (wide screen pictures), should be limited to no more than 15% of the total television viewing per week. [. . . ] After the available channels are memorized, use the CH and CH buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual). Selecting the Video Signal Source Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i. e. , an antenna or a cable system). 1 Press the MENU button. Press the or button to select "Channel", then press the ENTER button. Input Picture Sound Channel Setup Guide Channel Antenna : Air Auto Program Add/Delete Favorite Channels Name Fine Tune Signal Strength Move Enter Return 2 Press the ENTER button to select "Antenna". Press the or button to select "Air" or "Cable", then press the ENTER button. Input Picture Sound Channel Setup Guide Channel Air Antenna : Air Cable Auto Program Add/Delete Favorite Channels Name Fine Tune Signal Strength Move Enter Return 3 Press the or button to select "Auto Program", then press the ENTER button. Input Picture Sound Channel Setup Guide Channel Antenna : Air Auto Program Add/Delete Favorite Channels Name Fine Tune Signal Strength Move Enter Return continued. . . English - 33 O P E R AT I O N 4 Press the or button to select the antenna connection, then press the ENTER button. Auto Program Input Picture Sound Channel Setup Guide Move Enter Return Select the antennas to memorize. Air Cable Air + Cable Start Start Start oe Air : "Air" antenna signal Cable : "Cable" antenna signal Air+Cable : "Air" and "Cable" antenna signals When selecting Cable TV system: Press the . . . or button to select "Cable", then press the ENTER button. or button to select "STD", "HRC", or "IRC", then press the ENTER button. Press the oe or button to select "Start", then press the ENTER button. Auto Program Input Picture Sound Channel Setup Guide Move Enter Return Select the antennas to memorize. Air Cable Air + Cable Start Start Start Auto Program Input Select the cable system. Analog Picture STD HRC Sound IRC Channel Setup Guide Move Enter Return oe STD, HRC and IRC Start identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. Storing Channels in Memory 5 Press the or button to select the antennas to memorize. Auto Program Input Picture Sound Channel Setup Guide Move Enter Return Select the antennas to memorize. Air Cable Air + Cable Start Start Start 6 Press the ENTER button to start the auto program. The TV begins memorizing all available channels. Press the ENTER button at any time to interrupt the memorization process. Press the EXIT button to exit. Auto Program in progress. Auto Program Memorize Channel Air Channel 15 Stop oe The TV must be connected to an antenna in order to receive digital TV signals. Even if a particular channel is deleted from memory, you can always tune to that channel directly by using the number buttons on the remote control. · All available DTV and analog channels are automatically stored in memory when channels are selected by the direct tuning function. English - 34 O P E R AT I O N Adding and Erasing Channels To add channels that were not memorized (or to delete unwanted channels from memory): 1 Press the MENU button. Press the or button to select "Channel", then press the ENTER button. Input Picture Sound Channel Setup Guide Channel Antenna : Air Auto Program Add/Delete Favorite Channels Name Fine Tune Signal Strength Move Enter Return 2 Press the or button to select "Add/Delete", then press the ENTER button. Input Picture Sound Channel Setup Guide Channel Antenna : Air Auto Program Add/Delete Favorite Channels Name Fine Tune Signal Strength Move Enter Return 3 Repeatedly pressing the ENTER button will alternate between add channel and delete channel. Press the CH or CH button to switch to the appropriate channel, then repeat above. Air 11 Add / Delete In Memory Press ENTER to delete the channel. Delete <Delete channel> Add / Delete Press the EXIT button to exit. Air 11 Not In Memory Press ENTER to add the channel. Add < Add channel> Alternate method: Simply press the ADD/DEL and ENTER buttons on the remote control to add channels that were not memorized or to delete unwanted channels from memory. Add / Delete Air 11 In Memory Press ENTER to delete the channel. [. . . ] If none of these troubleshooting tips apply, then call your nearest Samsung authorized service center. Identifying Problems Problem Poor picture. Make sure the program is broadcast in color. If you are using a VCR, check the tracking. Unplug the TV for 30 seconds, then try operating it again. [. . . ]