User manual SAMSUNG HCN5527W

[. . . ] HCN4226W/HCN436W HCN4727W/HCN473W HCN5527W/HCN553W HCN653W/PCN5425R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PROJECTION TELEVISION SERVICE DIVISION 400 Valley Road, Suite 201 Mount Arlington, NJ 07856 TEL : 1-800-SAMSUNG (1-800-726-7864) www. samsungusa. com . . . . . . . . . . . . . Owner's Instructions BP68-00054A-02 Warning!Important Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates high voltage is present inside. [. . . ] Press the CH button to select "Channel", then press the VOL + button. Antenna ANT/CATV Auto Program Fav. Channel Fine Tune Add/Erase Labeling Channel :A : ANT : 00 : ---- 2 Press the CH button to select "Fav. Channel", then press the VOL + button. Antenna ANT/CATV Auto Program Fav. Channel Fine Tune Add/Erase Labeling Channel :A : ANT : 00 : ---- 3 Press the VOL + or VOL button to select the first channel. To select more favorite channels, press CH or CH , then press VOL + or VOL -. To erase the memorized Favorite Channel, select the channel by pressing the VOL +/VOL - buttons and then press the Add/Erase button. Fav. Channel : ANT Note: Only memorized channels can be set as Favorite channels. To View Your Favorite Channels: Press the Fav. CH button repeatedly to jump from one favorite channel to another. CHAPTER THREE: TV OPERATION 3. 11 O P E R AT I O N Adding and Erasing Channels (Manual Method) 1 Press the Menu button. Press the CH button to select "Channel", then press the VOL + button. Antenna ANT/CATV Auto Program Fav. Channel Fine Tune Add/Erase Labeling Channel :A : ANT : 00 : ---- 2 Press the CH button to select "Add/Erase", then press the VOL + button. Antenna ANT/CATV Auto Program Fav. Channel Fine Tune Add/Erase Labeling Channel :A : ANT : 00 : ---- 3 Press the VOL + button, then press CH / CH or number buttons to select the channel you want to add or erase. Press the Menu button. Channel Select Add/Erase : ANT 11 : Erased 4 Press the CH or CH button to select "Select". Press the VOL + or VOL button to select "Added" or "Erased". Press the Menu button to exit the menu. Channel Select Add/Erase : ANT 11 : Added 3. 12 CHAPTER THREE: TV OPERATION O P E R AT I O N Labeling the Channels Use this feature to assign an easy-to-remember label to any channel (i. e. , "CBS", "ESPN", "PBS2", CNN1", etc. ) A label consists of four fields, where each field is a letter, a number, "*", or a blank. When the DISPLAY button is pressed, the channel label will appear next to the channel number. 1 Press CH or CH to tune to the channel that will be labeled. 2 Press the Menu button. Press the CH button to select "Channel", then press the VOL + button. Antenna ANT/CATV Auto Program Fav. Channel Fine Tune Add/Erase Labeling Channel :A : ANT Note: You cannot select "Labeling" in the A/V mode. : 00 : ---- 3 Press the CH button to select "Labeling". Press the VOL + button to begin labeling. The left-most field will be highlighted. See top paragraph. ) Antenna ANT/CATV Auto Program Fav. Channel Fine Tune Add/Erase Labeling Channel :A : ANT : 00 : ---- 4 Press the CH or CH button to select a letter, a number, or a blank. (Press the CH or CH button results in this sequence: A, B, . . . Z, blank, 0, 1, . . . 9). Antenna ANT/CATV Auto Program Fav. Channel Fine Tune Add/Erase Labeling Channel :A : ANT : 00 : A--- 5 Press the VOL + button switch to the next field, which will be highlighted. [. . . ] When your remote control is in the "VCR" (or DVD) mode, the volume buttons still control your TV's volume. When your remote is in the "TV" mode, the VCR control buttons (PLAY, PAUSE, etc. ) will still operate your VCR. 5 Press the Power button on the remote control. If your VCR (or DVD) turns on, your remote control is now set correctly. 6 Once your remote control is set up, press the MODE button any time you want to use the remote to operate your VCR (or DVD). CHAPTER FOUR: SPECIAL FEATURES 4. 20 S P E C I A L F E AT U R E S Setting Up Your Remote Control to Operate Your Cable Box 1 Turn off your cable box. 2 Press the MODE button and make sure that the Cable LED is illuminated. The remote control has four "modes": "TV, " "VCR, " "CABLE" and "DVD. " Press the "MODE" button to switch the remote control to the "Cable" mode. 3 On your Samsung remote control, press SET. 4 Enter 3 digits of the cable box code listed below for your brand of cable box. Make sure you enter 3 digits of the code, even if the first digit is a "0. " (If more than one code listed, try the first one. ) 5 Press Power. If your cable box turns on, your remote control is now "set up" correctly. If your cable box does not turn on, repeat steps 2, 3, and 4, but try one of the other codes listed for your particular brand of cable box. [. . . ]