User manual SAMSUNG HL-P4667W QUICK START

[. . . ] You should keep your TV selected to "Cable IN" so that you can use the TV's features. When viewing premium channels or recording with the VCR, select "Air IN" (whichever channel is vacant in your area), then use the converter box to change channels. Caution: If you want to record one channel while watching another channel, a splitter (not included) must be added between the cable and "Cable IN". One output of the splitter goes to "Cable OUT" and the second output is connected to IN on the cable converter box. [. . . ] (These buttons change channels in the PIP window only. ) MODE Selects a target device to be controlled by the Samsung remote control (i. e. , TV, STB, VCR, CABLE, or DVD). Ò PRE-CH Tunes to the previous channel. ÷ CAPTION Controls the caption decoder. ® VCR/DVD CONTROLS Controls VCR or DVD functions: Rewind, Stop, Play/Pause, Fast Forward. Ú SOURCE Press to display all of the available video sources (i. e. , TV, Set-Top box, VCR, DVD, DTV). RESET If your remote control is not functioning properly, take out the batteries and press the reset button for about 2~3 seconds. Re-insert the batteries and try using the remote control again. Æ CH / Press to change channels. Moves from one set of screen information to the next in TV Guide menu. i INFO Press to display information on the TV screen. 9 Turning the TV On and Off Press the POWER button on the remote control. You can also use the POWER button on the front panel. Viewing the Menus and On-Screen Displays The on-screen menu system allows you to control the settings of your TV. Access the onscreen menu system by pressing the Menu button on the remote control. Once the onscreen menu appears, use the . . . //oe//ENTER buttons on your remote control to select menu items and make adjustments. You can also view the on-screen menu system and make some adjustments using the TV's side panel buttons. Viewing the Menus Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i. e. , an antenna or cable system). 1 Press the MENU button. There are six menu groups: "Input", "Picture", "Sound", "Channel", "Setup", and "Guide". 2 Press the . . . or button to select an item you want in the menu. Press the oe, or ENTER button to display, change, or use the selected items. or button to select the Antenna connection, then press the ENTER button. · Air : "Air" antenna signal Cable : "Cable" antenna signal Air+Cable : "Air" and "Cable" antenna signals · If the CableCARD is inserted into the"CableCARD" slot on the rear panel, "Cable" and "Air+Cable" are not available. Auto Program Input Picture Air Sound Channel Setup Guide Cable Air+Cable Move Enter Start Start Start 5 Press the button to select "Start", then press the ENTER button to start the auto program. The TV begins memorizing all available stations. Press the ENTER button at any time to interrupt the memorization process. · The TV MUST be connected to an antenna in order to receive digital TV signals. Even if a particular channel is deleted from the memory, you can always tune to that channel directly by using the number buttons on the remote control. Auto Program Input Picture Sound Channel Select the cable system. Analog STD HRC IRC Start Select the antennas to memorize Digital STD HRC IRC Return Setup Guide Move Enter Return When selecting Cable TV system: Press the . . . or button to select "Cable", then press the ENTER button. or button to select Analog or Digital "STD", "HRC" or "IRC" then press the ENTER button. · STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. [. . . ] If none of these troubleshooting tips apply, then call your nearest Samsung authorized service center. Poor picture quality. Poor sound quality. Try another channel. Make sure the MUTE button is off. No picture or sound. Try another channel. Check the antenna connections. No color, wrong colors or tints. Make sure the program is broadcasted in color. [. . . ]