User manual SAMSUNG HLM507W INTRODUCTION

[. . . ] DLPTV DLPTV Samsung Electronics of America, Inc. Service Division 400 Valley Road, Suite 201 Mt. 07660 TEL: 1-800-SAMSUNG (1-800-726-7864) www. samsungusa. com BP68-00081A-00(ENG) INSTRUCTION MANUAL HLM4365W/HLM5065W/HLM437W/HLM507W/HLM617W Safety Instructions Warning!Important Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Thank You for Choosing Samsung Thank you for choosing Samsung! [. . . ] Repeat the process to select the last two digits. Press the Menu button to exit. 4 Press the Menu button to exit. 5 36 37 Operation Picture Control Using the remote, you can change the contrast, brightness, tint, color, and sharpness settings of the TV. Using Automatic ("Standard") Picture Settings 1 Press the P. Mode button on the remote control to change the picture settings. Customizing the Picture 1 Press the Menu button. Press the joystick to enter. 2 Move the joystick down to select Adjust, then press the joystick to enter. You will see the items "Contrast", "Brightness", "Sharpness", "Color" and "Tint". Press P. Mode repeatedly to select the "Dynamic", "Standard", "Movie" or "Custom" picture setting. 2 Guide to Automatic Picture Settings · Choose Standard to set the TV to operate at top performance according to your TV's specifications. · Choose Dynamic for viewing the TV during the day or when there is bright light in the room. · Choose Movie when viewing the movie. · Choose Custom if you want to adjust the settings yourself. 3 4 Move the joystick up or down to select the item you want to change. Move the joystick right or left to raise or lower the value of the item, using the on-screen gauge as your guide. When you are finished adjusting an item, wait a moment. The level indicator will disappear and the Video menu will return. You can continue to make adjustments, or press the Menu button to exit. 38 39 Operation Sound Control You can control and customize the sound levels and settings of the TV with the remote control. Using the on-screen menus, you can change the TV's bass, treble, and balance settings. 3 4 Move the joystick up or down to select the item you want to change. Adjusting the Volume Press VOL + to raise the volume or VOL ­ to lower the volume. Move the joystick right or left to raise or lower the value of the item, using the onscreen gauge as your guide. You can continue to make adjustments, or press the Menu button to exit. Using the Mute Button Press the Mute button on the remote control to silence the volume. The word "Mute" will appear in the lower left corner of the screen. To turn mute off, press the Mute button again, or raise or lower the volume with the VOL ­ and VOL + buttons. Using Automatic(Standard) Sound Settings 1 2 Press the S. Mode button on the remote control to change the automatic sound setting. Customizing the Sound 1 2 Press the Menu button. Move the joystick down to select SOUND, then press the joystick to enter. Press the S. Mode button again to select the "Standard", "Music", "Movie", "Speech" or "Custom" sound setting. Guide to Automatic Sound Settings Move the joystick down to select Adjust, then press the joystick to enter. You will see the items "Bass", "Treble" or "Balance". · · · · · Choose Choose Choose Choose Choose Standard for the "factory" settings (the best choice for most people). Music when watching music videos or concerts. Speech when watching a show that is mostly dialogue, like a news show. Custom if you want to adjust the settings yourself. Continued. . . 40 41 Operation Setting the Clock This TV has a built-in clock that will appear on screen when you press the Display button on the remote control. Setting this clock also allows you to use it to automatically turn the TV on or off. Setting the Timers This TV can be set to turn on or off automatically at specific times that you choose. Before using the timers, you must set the TV's clock, as described previously. Setting the On/Off Timer 1 Press the Menu button. Move the joystick down to select SETUP, then press the joystick to enter. 1 Press the Menu button. [. . . ] Remove picture noise (vertical stripes) on the screen by moving the joystick right or left. (If phase is not set properly, the picture may be blurry. ) Press the Menu to exit. To Initialize the Screen Position and Picture Quality Adjustment After steps 1~2 above are completed, move the joystick down to select Recall. Press the joystick to initialize the screen position and picture quality. NOTE · When `Recall' is active, the TV screen will become black and return to the original view about five seconds later. (This is a normal operation. ) 82 83 PC Display Changing the Screen Size (PC mode) When you press the ASPECT button on the remote control, the TV's screen mode choices appear in sequence. [. . . ]