User manual SAMSUNG HM1100

[. . . ] 22 1 English English Using your headset Appendix Please read this manual before operating your headset, and keep it for future reference. Graphics used in this manual are for illustration purposes. No part of this user manual may be reproduced, distributed, translated, or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or storing in any information storage and retrieval system, without the prior written permission of Samsung Electronics. Trademarks • SAMSUNG, and the SAMSUNG logo are registered trademarks of Samsung Electronics. [. . . ] Your headset supports the Simple Pairing feature which allows the headset to be paired with a phone without requesting a PIN. This feature is available for phones that are compliant with Bluetooth version 2. The headset can also be paired via the Active pairing feature. 10 Connecting with two Bluetooth phones With the Multi-point feature activated, your headset can be connected to 2 Bluetooth phones at the same time. 1 After connecting with the first Bluetooth phone, press and hold the Talk button until the blue indicator light stays lit. 2 Press and hold the Volume up button to activate the Multi-point feature. 3 Activate the Bluetooth feature on the second Bluetooth phone and search for the headset (see your phone’s user manual). 4 Select the headset (HM1100) from the list of devices found by the second Bluetooth phone. 5 If requested, enter the Bluetooth PIN 0000 (4 zeros) to connect the headset to the second Bluetooth phone. 6 Reconnect to the headset from the first Bluetooth phone. When connecting the headset to 2 Bluetooth phones, some phones may not be able to connect as a second Bluetooth phone. English 11 To turn Multi-point feature on In Pairing mode, press and hold the Volume up button. To turn Multi-point feature off In Pairing mode, press and hold the Volume down button. Disconnecting the headset Turn off the headset or use the Bluetooth menu on your phone to remove the device from your pairing list. Reconnecting the headset If the headset loses the connection to the paired phone, • Press the Talk button on the headset or use the Bluetooth menu on your phone. Your headset will attempt to automatically reconnect each time you turn it on. This feature may be unavailable on some phones. If the Multi-point feature is activated, your headset will attempt to reconnect to the two most recently connected devices. 12 Pairing via the Active pairing feature With the Active pairing feature, your headset can automatically look for a Bluetooth phone and try to make a connection with it. This feature is available for mobile phones, but the phone’s Bluetooth visibility option must be turned on. 1 In Pairing mode, press and hold the Talk button to enter Active pairing mode. 2 The violet indicator light turns on and the headset will search for a Bluetooth phone within range, and attempt to pair with it. [. . . ] Your headset produces significantly less power than a typical mobile phone. It also only emits signals that are in compliance with the international Bluetooth standard. Therefore, you should not expect any interference with standard consumergrade electronics equipment. English 17 Can other Bluetooth phone users hear my conversation? [. . . ]