User manual SAMSUNG HM3200

[. . . ] copyright Copyright © 2011 Samsung Electronics This user manual is protected under international copyright laws. No part of this user manual may be reproduced, distributed, translated, or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or storing in any information storage and retrieval system, without the prior written permission of Samsung Electronics. Trademarks • SAMSUNG, and the SAMSUNG logo are registered trademarks of Samsung Electronics. € All other trademarks and copyrights are the property of their respective owners. [. . . ] In Pairing mode, two devices should be placed close enough to each other. Pairing and connecting the headset with a phone 1 Enter Pairing mode. € With the headset turned on, press and hold the Talk button for 3 seconds. € If the headset is turned on for the first time, it will go into Pairing mode immediately and the Pairing mode stays for 3 minutes. 2 Activate the Bluetooth feature on your phone and search for the headset (see your phone’s user manual). 3 Select the headset (HM1200) from the list of devices found by your phone. 4 If requested, enter the Bluetooth PIN 0000 (4 zeros) to pair and connect the headset to your phone. Your headset supports the Simple Pairing feature which allows the headset to be paired with a Bluetooth device without requesting a PIN. This feature is available for devices that are compliant with Bluetooth version 2. 10 The headset can also be paired via the Active pairing feature, see page 13. English Connecting with two Bluetooth phones With the Multi-point feature activated, your headset can be connected to 2 Bluetooth phones at the same time. Place the headset and phone close to each other to avoid pairing with other devices. • The headset will attempt active paring for up to 20 seconds. € The Bluetooth phone you want to connect with must not be paired with other devices. If the phone is already connected to another device, end the connection and restart the Active pairing feature. € This feature may not be available on some devices. English 13 Using call functions Available call functions may differ from phone to phone. Making a call Redialling the latest number To redial the latest number on the primary phone, • Press the Talk button. To redial the latest number on the secondary phone, • Press the Talk button twice. For some phones, pressing the Talk button opens the call log list. Press the Talk button again to dial the selected number. Dialling a number by voice Press and hold the Talk button and say a name. [. . . ] Your headset produces significantly less power than a typical mobile phone. It also only emits signals that are in compliance with the international Bluetooth standard. Therefore, you should not expect any interference with standard consumer-grade electronics equipment. will my headset interfere with my car’s electronics , radio , or computer? [. . . ]